The right oil filter is Honda OEM part number 15410-PLM-A02 for the 2015 Odyssey’s 3.5L V6.
In this article, we break down how to identify the exact part, compare OEM vs aftermarket options, and what to consider when shopping for a filter. We also cover oil type and basic maintenance tips to keep your engine running smoothly.
Official Honda part
This section lists the Honda-recommended filter that fits the 3.5L V6 in the 2011–2017 Odyssey range, including the 2015 model.
Engine and model coverage
The 2015 Honda Odyssey uses a 3.5L V6 in the J35 family. The OEM oil filter commonly recommended for this engine and era is 15410-PLM-A02. Always verify compatibility with your specific vehicle using your VIN or by checking the official Honda Parts Catalog.
- 15410-PLM-A02 — Honda OEM oil filter for the 3.5L V6 Odyssey (typical fitment on 2011–2017 models, including 2015).
- Note: Some early or late production runs may reference 15410-PLM-A01 as a predecessor; confirm with your vehicle’s VIN or dealer to ensure you have the correct revision.
Concluding: Use the exact Honda part 15410-PLM-A02 for a straightforward fit, and double-check via VIN or the official parts catalog if your odometer date or trim level differs.
Aftermarket and cross-reference options
If you prefer aftermarket filters, many brands offer models that fit the Honda 3.5L V6 Odyssey. The key is to ensure the filter matches the engine’s thread size, gasket size, and overall height so it seals properly and maintains proper oil flow.
What to verify
When selecting an aftermarket filter, verify:
- It lists fitment for Honda 3.5L V6 engines in Odyssey models from roughly 2011–2017
- The thread size matches the oil filter housing (commonly around M22x1.5 for many Hondas, but always confirm)
- Gasket outer diameter and overall height are compatible with the oil pan and cover
- Choose reputable brands (e.g., Bosch, Wix, Purolator, Fram) and use the retailer’s cross-reference tool to confirm model compatibility with your exact year and engine.
- Avoid filters with vague fitment notes; if in doubt, ask the parts counter or check the retailer’s fitment chart against your VIN.
Concluding: Aftermarket filters can save money and are widely available, but precise compatibility matters for seal, oil flow, and proper fitment. Always verify using your VIN and the product’s specification sheet.
Oil type, capacity, and maintenance tips
For the 2015 Odyssey’s 3.5L V6, Honda commonly recommends 5W-20 full-synthetic oil. Oil capacity with a filter change is typically around 4.7–5.0 quarts, depending on the exact filter used and whether you drain the entire pan. Always consult the owner's manual or the under-hood oil fill cap for the exact specification for your vehicle.
Summary
In short, the easiest and most reliable choice for a 2015 Honda Odyssey is the OEM filter 15410-PLM-A02. If you opt for aftermarket filters, ensure the model is explicitly listed as compatible with the 3.5L V6 Odyssey (2011–2017) and verify thread size, gasket diameter, and height against your vehicle. Pair the filter change with the recommended 5W-20 oil and follow service intervals per Honda guidance.