You can adjust the CR-V's clock either with a physical CLOCK button on older dashboards or through the touchscreen clock in the infotainment system on newer models. The exact steps depend on the model year, but both methods are straightforward and quick to use.
Two main ways to set the clock
Choose the method that matches your CR-V’s generation. Below are the common steps for each approach.
Older CR-Vs and some mid-generation models (physical CLOCK button)
Before you begin, make sure the ignition is on and the clock display is active.
- Locate the CLOCK button near the audio or climate controls. Press and hold it until the time digits flash on the display.
- Use the H (hours) and M (minutes) control buttons to set the correct time. Some models use +/- or arrow buttons for each increment.
- Press CLOCK again or wait a moment for the new time to save and stop the digits from flashing.
This method is common on older CR-Vs and does not rely on GPS data to keep time. If your clock drifts, a manual reset is usually the quickest fix.
Newer CR-Vs with touchscreen clock in the infotainment system
Accessing time settings is typically done through the vehicle’s touchscreen.
- Turn on the ignition and press Home on the infotainment screen. Open Settings or System Settings.
- Select Clock or Time. You may see options for Auto (GPS/network) or Manual.
- If Manual, adjust the hours and minutes on the on-screen controls and confirm the change if prompted.
- If Auto, ensure GPS is enabled so the clock updates automatically as you travel or change time zones.
Note: Some models keep the instrument cluster clock separate from the infotainment clock. If they don’t match, adjust both or enable Auto time where available.
Tips for keeping the time accurate
If your CR-V supports automatic time, enabling GPS-based time can help keep the clock accurate across time zones. If you frequently travel across borders or time zones, check that the GPS signal is strong and that Auto time is selected in Settings.
Summary
To adjust the time on a Honda CR-V, use the physical CLOCK button for older models or use the infotainment touchscreen for newer models. For manual time, set hours and minutes directly; for automatic time, enable GPS-based time updates. If discrepancies arise, repeat the manual adjustment or verify that Auto time is enabled in the settings.