No. Not all Audi wheels use the 5x112 pattern. While 5x112 is the dominant bolt pattern on the majority of modern Audis, there are exceptions based on model, generation and market. This article outlines where 5x112 is standard and where other patterns appear.
Understanding Audi bolt patterns and why they vary
A bolt pattern (or PCD) describes how many lug holes a wheel has and how far apart they are. For wheel compatibility, you must match the lug count, the PCD, the center bore, and the offset. Audi has standardized 5-lug patterns across many recent models, but some older or smaller models still use different patterns. Buyers and owners should always verify the exact specification for their specific year and trim before purchasing wheels or adapters.
5x112: The mainstream pattern on most modern Audis
In the current era, 5x112 is the standard bolt pattern for a large portion of Audi’s lineup. This includes the most common passenger cars and SUVs, as well as many S and RS variants. Vehicles in this group typically share the same wheel mounting theory, which simplifies cross-model wheel upgrades within the 5x112 family.
Common characteristics of the 5x112 pattern include:
- Five lug holes arranged on a 112 mm pitch circle diameter (PCD).
- Center bore sizes frequently around 66.6 mm, though some models differ.
- Compatibility across many A4/A5/A6/A7/A8 and Q-series platforms, with appropriate offset and bore considerations.
Wheels built for 5x112 are widely available for modern Audis, and many aftermarket options are marketed as 5x112 compatible. However, fitment still depends on the exact vehicle year, trim, and optional equipment.
Exceptions and other bolt patterns you may encounter
Not every Audi uses 5x112. Some smaller or older models, as well as certain markets, have used different bolt patterns. When shopping for wheels or adapters, it’s important to confirm the exact pattern for your car’s year and market.
- 5x100 patterns have appeared on some entry-level models and certain generations of smaller Audis and TT variants.
- Older Audi models and certain market-specific versions may have used 4x100 in the past or in limited runs.
Given the variations, the safest approach is to check the official Audi parts catalog or your vehicle’s owner manual for the precise bolt pattern, center bore, and offset for your exact model and year.
Summary
Five-lug 112 mm (5x112) is the prevailing wheel bolt pattern for most of Audi’s modern lineup, especially the A4, A5, A6, A7, A8, and the Q-series. However, not all Audi models use 5x112—older or smaller models like some A1, TT, and early A3 variants can employ 5x100 or even 4x100. Always verify the specific bolt pattern for your vehicle before buying wheels or adapters, and consult Audi’s official specifications or a trusted parts retailer for your exact year and trim.