A replacement fuel pump for a Jeep Cherokee generally costs between roughly $120 and $600 for the part itself, with the total installed price often in the $300 to $900 range depending on the model year, the part choice (OEM vs aftermarket), and labor rates.
The Jeep Cherokee spans several generations, and the fuel pump is typically an in-tank module. Prices vary by generation (XJ, KK, KL), whether you buy OEM Mopar parts or aftermarket equivalents, and whether you replace just the pump or the entire pump module. This article summarizes typical price ranges, factors that influence cost, and buying tips as of 2024–2026.
Price ranges by part type
What you pay for the pump module itself varies by whether you choose aftermarket, OEM, or remanufactured options. Here are common ranges you’ll see across most Cherokee generations.
- Aftermarket fuel pump module: typically $120–$250
- OEM Mopar fuel pump module: typically $250–$600
- Used or remanufactured modules (where available): typically $100–$350
Prices can fluctuate based on the Cherokee’s year, engine, and where you shop. Always verify compatibility with your exact vehicle before purchasing.
Labor costs and total installed price
Labor to replace an in-tank fuel pump varies with access and regional shop rates. Typical ranges include:
- Labor for in-tank fuel pump replacement: $120–$300
- Additional charges for fuel tank access or removal: $50–$150
- Total installed price (parts + labor): commonly $320–$900
Note that very new or complex generations (and difficult tank access) can push toward the higher end of the range. If diagnostics are needed before replacement, that can add to the cost.
What affects the price
Several factors determine where the price lands for a Jeep Cherokee fuel pump job:
- Generation and model year (XJ, KK, KL) and engine type
- OEM vs aftermarket parts
- Whether you replace the entire pump module or just the pump
- Labor rates and regional cost of living
- Required related components (fuel filter, sock, seals, or sender assembly)
Getting an exact quote requires knowing your VIN and confirming the correct part number for your vehicle. Shop around local shops and online retailers to compare prices.
Where to shop for a Jeep Cherokee fuel pump
Several reliable avenues exist to purchase the pump or have it installed. Common options include:
- Auto parts chains (AutoZone, O'Reilly, Advance Auto Parts)
- Online retailers (RockAuto, dealership parts websites, authorized Mopar distributors)
- Dealership parts departments for OEM Mopar parts
- Local independent shops and garages for labor estimates
Always verify compatibility with your vehicle’s year, engine, and trim, and check warranties on both parts and labor. Consider getting multiple quotes to ensure a fair price.
Summary
Fuel pump pricing for a Jeep Cherokee varies widely by generation, part type, and labor. Parts typically run from about $120 to $600, while installed costs commonly fall in the $320 to $900 range. Always confirm exact part compatibility for your vehicle, compare several quotes, and factor in potential diagnostic or tank-access charges when budgeting.