The gas filler on the Honda Fit is on the driver’s side, rear half of the car. Open it by pulling the interior fuel-door release lever near the driver’s left foot, then swing the exterior door open to access the cap.
Location of the fuel door
The fuel door is mounted on the left rear quarter panel, just behind the rear door and beside the taillight. The exterior panel swings outward when released.
How to open from inside the car
Inside the cabin, look for the fuel-door release lever or switch near the driver’s left foot or along the lower dash. Pull the lever or flip the switch to release the door. In many fits, you’ll need to unlock the car first for the release to work.
How to open from outside
With the door released, walk to the rear-left corner, press on the edge of the fuel door to pop it open, then turn the gas cap counterclockwise to remove it. After fueling, replace the cap and close the door until it latches.
Steps to fuel safely
Follow these steps to access the fuel tank and complete fueling safely.
- Park the car, turn off the engine, and engage the parking brake.
- Unlock the car if required for the interior release to function.
- Release the fuel door from inside or outside as described above.
- Remove the gas cap by turning it counterclockwise.
- Refuel, then reattach and tighten the cap and close the door.
Adhering to these steps helps prevent spills and ensures a proper seal after fueling.
Common issues and quick fixes
If the fuel door won’t open, verify the car is unlocked and try the interior release again. If it still sticks, gently wiggle the door edge while applying light pressure. A faulty latch or fuse may require inspection by a technician.
Summary: For most Honda Fits (2007–2020), the gas tank filler is on the driver’s side rear quarter panel. Access it via the interior fuel-door release near the left foot, or by using the exterior door after release, then unscrew the cap to fuel. Always follow safety precautions when refueling.