Expect roughly $300 to $800 per wheel for a wheel bearing repair on a Honda Accord, depending on whether the hub assembly is replaced and local labor rates.
The Honda Accord spans several generations, and wheel bearing configurations vary by year and trim. Costs also differ between front and rear bearings, whether a full hub assembly is installed, and the shop’s hourly rate. This article outlines typical price ranges, what drives them, and how to obtain accurate quotes.
What determines the price
Several factors influence how much you’ll pay to repair or replace a wheel bearing on a Honda Accord. These include the location, whether the work is done at a dealership or independent shop, and whether the service uses a hub assembly or a press-in bearing.
Key cost drivers
- Front wheel hub assembly replacement (one wheel): Parts typically $100–$350; labor around 1.5–3 hours; total commonly $300–$800.
- Rear wheel hub assembly replacement (one wheel): Parts typically $120–$320; labor around 1–2 hours; total commonly $250–$700.
- Bearing-only replacement (less common on newer models): Parts typically $20–$120; labor around 2–4 hours; total commonly $250–$600.
- Location and shop type: Dealerships generally charge more than independent shops; prices vary by region and market.
These figures reflect typical U.S. pricing observed in 2024–2025 and can vary with model year, region, and the specific parts used (OEM vs. aftermarket).
What to consider when comparing quotes
To ensure you’re comparing apples-to-apples, shop for itemized estimates and understand what each quote includes before you authorize work.
Below are practical tips for getting accurate quotes and understanding what’s included.
- Ask for an itemized estimate that separates parts, labor, and shop supplies.
- Clarify whether the quote covers a hub assembly or a bearing-only replacement.
- Find out if ABS sensor replacement or calibration is included if the hub contains the sensor.
- Confirm whether wheel alignment and any brake work are included or available as add-ons.
- Request quotes from multiple shops and verify warranties on both parts and labor.
When shopping around, you’ll often find the lowest price isn’t always the best value. Look for clear warranties, reputable service history, and whether the shop uses the correct torque specs and quality parts for your Accord.
What to expect during the repair
diagnosing a wheel bearing issue typically involves road testing, wheel shake or play inspection, and listening for grinding or humming noises. If a hub assembly is replaced, technicians may need to remove the brake rotor, axle nut, and wheel, and re-torque components to manufacturer specifications. After the repair, some shops may include a brake check or a basic wheel alignment, but always confirm what’s included in your quote.
In some cases, a faulty wheel bearing can affect the ABS system or trigger warning lights; in such cases, a sensor check or re-calibration might be required, potentially adding to the final cost.
Summary
For a Honda Accord, wheel bearing work typically falls in the $300 to $800 per wheel range when a hub assembly is replaced, with variations by model year, front vs rear location, and regional labor rates. Bearing-only replacements are less common on newer models but can be cheaper in parts, often with higher labor. Always obtain multiple, itemized quotes, confirm what’s included, and consider warranties and potential ancillary costs such as alignment or ABS sensor work. By comparing quotes carefully, you can choose the best value and avoid surprises at the repair shop.