Quick answer: Use the reinforced pinch welds along the rocker panels (front and rear) and the official jacking points on the front subframe and rear crossmember; always use jack stands and wheel chocks.
In detail, the 2019 CR-V relies on specific lift points designed to protect the undercarriage and trim. Honda’s guidance emphasizes lifting at reinforced pinch welds along the rocker panels and at designated points on the front and rear frame members. This article outlines where to place a floor jack and stands for common maintenance tasks, and how to do so safely.
Jack points for the 2019 CR-V
These are the primary lifting locations recommended by Honda for lifting the vehicle with a floor jack.
- Front pinch weld jack point: the reinforced area along the rocker panel beneath the front door, near the wheel opening. Position the floor jack pad on this seam for the front lift.
- Front center jacking point (front subframe crossmember): a designated center point on the front undercarriage for center-lift use, as described in the owner's manual. Use only if your jack and pad are compatible, and contact the crossmember rather than components like the radiator or oil pan.
- Rear pinch weld jack point: the reinforced pinch weld along the rocker panel beneath the rear door, near the rear wheel. This supports lifting the rear of the CR-V.
When lifting from these points, ensure you use a floor jack with a suitable pad, and have a second person assist with attaching jack stands to secure the vehicle before any work is performed.
Front lifting point details
Front pinch weld details: The correct front lift point sits on the reinforced notch of the rocker-panel pinch weld under the front doors. Place the jack pad on this area to elevate the vehicle's front safely. Avoid contacting the plastic splash shield, exhaust components, or other non-reinforced surfaces.
Front center jacking point (if advised by the manual): Some CR-Vs have a designated center point on the front subframe crossmember for center lifting. Use this only if your equipment specifies compatibility, and ensure the pad sits on a solid metal surface rather than delicate components.
Rear lifting point details
Rear pinch weld details: The rear lift point mirrors the front approach, located on the rocker-panel pinch weld beneath the rear doors. The reinforced area is designed to bear the load of a floor jack. Do not place the pad on non-reinforced trim or exhaust components.
Safe lifting procedure
Before starting to lift, set the scene for safety: level ground, parking brake engaged, and wheel chocks placed on the opposite end of the lift.
- Park on a level surface, engage the parking brake, and chock the wheels opposite the lifting end.
- Loosen lug nuts slightly before lifting if you plan to remove a wheel; this makes the wheel easier to remove once the car is raised.
- Position the floor jack at the appropriate jack point (front or rear) and lift slowly until the wheel is off the ground or you reach the desired height for placing jack stands.
- Place jack stands under the designated reinforcement points (pinch welds or crossmembers) and ensure the vehicle is stable before working underneath it.
- Lower the vehicle slowly when finished, remove the stands, and retighten lug nuts to the proper torque if a wheel was removed.
Important safety reminder: never lift from the exhaust, oil pan, or non-reinforced parts of the undercarriage. Use wheel chocks, solid ground, and always support the car with jack stands before performing work beneath the vehicle. If in doubt, consult the 2019 CR-V owner’s manual or contact a Honda service professional for guidance.
Summary
For a 2019 Honda CR-V, follow the manufacturer’s guidance by lifting at the reinforced pinch welds along the rocker panels (front and rear) and at the front subframe crossmember or other designated front jacking points noted in the manual. Always use wheel chocks and jack stands on a level surface, and avoid lifting from non-reinforced areas. When in doubt, refer to the owner’s manual or seek professional assistance to ensure a safe lift.