Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

Where is the VSA fuse located?

In most Honda and Acura vehicles, the VSA fuse is found in the under-hood fuse/relay box, typically labeled VSA or ABS/VSA; some models also place a VSA fuse in an interior fuse panel near the driver's dash. Always verify with your owner's manual for your exact model and year.


Common locations for the VSA fuse


The following are the most frequent places where VSA-related fuses appear in popular Honda and Acura models. Use these as a starting point, but confirm the exact location for your vehicle.



  • Under-hood fuse/relay box: Look for a fuse labeled "VSA," "ABS/VSA," or something similar. The fuse is usually a small rating, commonly 7.5 A to 10 A.

  • Interior fuse panel (driver’s side dash or kick panel): Another common spot for a VSA or ABS-related fuse; labels vary by model and may read "VSA," "ABS," or "Powertrain."

  • ABS module/ECB circuit area: In some generations, VSA is routed through the ABS/ECB fuse; if you don’t see a VSA label, check the ABS/ECB fuse position on the diagram.


Note: In certain model years, the VSA fuse may be combined with other stability-related circuits or located behind the glove box or near the brake actuator. Always consult the fuse box diagram on the cover or the owner’s manual for the exact label.


How to locate the fuse using official documentation


To avoid mislabeling, use your owner's manual or the fuse box diagram printed on the inside of the fuse box cover. Here’s how to proceed:



  • Open the under-hood fuse box and read the diagram to identify the position of the "VSA" or "ABS/VSA" fuse.

  • Use a fuse puller or careful fingers to remove the suspected fuse and inspect for a blown filament.

  • Replace only with the same amperage as specified in the diagram; if in doubt, consult a dealer or certified technician.


If you’re replacing a blown VSA fuse, ensure there are no other fault conditions in the ABS or stability-control system that could cause repeated fuse failure.


What to do if you can't locate the VSA fuse


If your model isn’t listed in common guides or you’re unsure, contact your local Honda or Acura dealer or a trusted auto mechanic. Provide your vehicle’s VIN and model year for precise fuse-location information for your exact vehicle.


Summary


For most Honda and Acura vehicles, the VSA fuse is found in the under-hood fuse box and is labeled VSA or ABS/VSA. Some models may place the fuse in an interior fuse panel. Always refer to the owner’s manual or the fuse box diagram for your specific model and year, as locations can vary between generations. Regularly checking the fuse and related ABS/ESC components helps maintain stability-control reliability.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.