The starter on a 2014 Honda Accord LX is mounted to the engine block near the bell housing on the passenger side of the engine bay, connected to the battery by the main positive cable. It’s a cylindrical motor located low in the engine compartment and accessible from either above or below with the right approach.
Locating it in the engine bay
The starter is bolted to the side of the engine where the transmission bell housing sits. On this front‑wheel‑drive model, that area is toward the passenger side of the vehicle and sits low in the bay, near the exhaust manifold. Access may require removing a protective shield or some intake components for a clear view.
How to identify the starter
Look for a small cylindrical device with a protruding solenoid and two thick electrical connections. It is mounted to the engine block beside the bell housing, typically secured with two mounting bolts. One of the cables is the main battery lead, and the other is a feed to the engine wiring harness.
To locate it quickly, follow the main battery lead from the positive terminal toward the engine until you reach the component attached to the block near the gearbox.
- Open the hood and locate the large positive battery cable that runs toward the engine; it typically ends at the starter.
- Trace the wire to the engine side of the bell housing; the starter will be mounted to the block just next to the transmission.
- Identify the cylindrical motor with a solenoid and two heavy cables attached; this is the starter.
Before you begin, ensure the vehicle is off and the negative battery terminal is disconnected to prevent any electrical shock or short circuits.
Conclusion: The starter on the 2014 Accord LX sits on the engine block near the transmission bell housing on the passenger side of the engine bay, and it can be accessed from the top or bottom with the appropriate shields removed.
What to do if the starter needs replacement
If you suspect the starter is failing, have a professional diagnose the issue. Replacement generally requires disconnecting wiring, supporting or removing components as needed, and removing two mounting bolts to free the starter from the bell housing. Reinstallation is the reverse of removal, followed by a test to confirm proper operation.
Summary
The starter is located on the engine block near the bell housing on the passenger side of a 2014 Honda Accord LX. It’s a cylindrical motor with two large cables attached and is accessible with modest disassembly of surrounding shields or intake components. Always disconnect the battery before working on electrical components and consider professional help for replacement.