The starter on a 2014 Town & Country is mounted to the engine block near the bell housing on the passenger side of the engine, usually accessible from beneath the vehicle.
Understanding the engine layout and where the starter sits
In the 2014 Town & Country, Chrysler used the 3.6L Pentastar V6. The starter is a cylindrical motor attached to the engine block just in front of (or near) where the transmission bolts to the engine. You’ll typically find it on the passenger side of the engine bay, toward the rear, close to the firewall.
Exact location for the 3.6L Pentastar V6
For the 3.6L Pentastar engine, the starter is mounted to the lower portion of the engine block on the passenger side, near the bell housing. From below, you should see a cylindrical unit with a large electrical plug and two mounting bolts that secure it to the engine.
When working around electrical components, always disconnect the battery first and avoid touching the starter's electrical connections with your bare hands.
How to locate the starter in practice
To locate the starter on your Town & Country, follow these practical steps. They help you confirm the exact site and prepare for any maintenance or replacement work.
- Park on level ground, engage the parking brake, and disconnect the negative battery cable to prevent shocks or shorts.
- Open the hood and locate the vehicle’s battery; trace the thick red positive cable that runs toward the engine.
- Follow that cable to the engine block and bell housing area; the starter is the cylindrical unit with an electrical connection and is secured by two mounting bolts.
- Look on the passenger side of the engine (the right side when seated in the vehicle), near where the engine meets the transmission; you may need to reach from underneath to see it clearly.
- Inspect the starter for looseness, corrosion, or damage to connections; if in doubt, have a professional test it with a starter or battery load tester.
The location is practical for maintenance, but accessing it may require slipping under the vehicle or raising it safely with stands if you cannot reach from above.
Summary
In a 2014 Chrysler Town & Country, the starter is mounted to the engine block on the passenger side near the bell housing, typically behind the right-front wheel well and accessible from underneath. Confirm by following the battery cable to the engine and inspecting the cylindrical starter unit attached to the engine block near the transmission.