The brake caliper mounting bolts for the front brakes on a 2012 Honda Accord are typically M10 x 1.5 with a 14 mm hex head.
In practice, bolt sizes can vary by market, trim, or a specific brake kit installed, and the caliper uses two mounting bolts to attach the caliper to the bracket. The exact specification should be confirmed against the vehicle’s service manual or the Honda parts diagram for your exact car.
Front brake caliper mounting bolts: typical size
The following size is what is most commonly found for the front caliper mounting bolts on a 2012 Accord. If your car uses a different brake setup, verify against official documentation or the hardware you have on hand.
- M10 x 1.5 bolts with a 14 mm hex head (two bolts) – commonly used to attach the front caliper to the caliper bracket
When servicing brakes, always double-check you’re using the correct hardware for your specific vehicle, and replace with new bolts if required. Using the wrong size or grade can affect braking safety.
How to verify the correct bolt size for your vehicle
To ensure you have the right hardware, consult the official service manual for the 2012 Honda Accord, inspect the existing bolt if available, or reference the Honda parts diagram for your exact VIN/market. If in doubt, seek guidance from a qualified automotive professional.
Summary: For a 2012 Honda Accord, front brake caliper mounting bolts are typically M10 x 1.5 with a 14 mm hex head. Always confirm exact specifications via the service manual or parts diagram for your vehicle.