Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size wiper blades for 2015 INFINITI QX60?

The typical front wiper blade setup for the 2015 INFINITI QX60 is 26 inches on the driver’s side and 18 inches on the passenger’s side, with a rear blade about 12 inches. This article explains the standard sizes and how to confirm them on your QX60, along with tips for replacement.


Front wiper blade sizes


To ensure optimal visibility, most 2015 QX60 models use two different front blades: one longer for the driver’s side and a shorter one for the passenger side. The following are the common OEM sizes you’re likely to need when shopping for replacements.



  • Driver’s side: 26 inches

  • Passenger side: 18 inches


In most cases, these two sizes will cover the front windshield wiping area and provide full coverage without gaps at the windshield corners.


Rear wiper blade size


The QX60’s rear window uses a single wiper blade that is significantly shorter than the front blades. The typical size for the 2015 model year is approximately 12 inches.



  • Rear blade: 12 inches


Rear blade sizes are less standardized than front blades, but 12 inches is the common fit for most 2015 QX60s. If your rear wiper uses a different clip or adapter, verify accordingly.


How to verify the correct size


To be absolutely sure you have the right blades for your exact car, you can:



  • Check the owner's manual or vehicle’s service information for the recommended blade sizes.

  • Remove one of the existing blades and measure its length along the outer edge.

  • Present the part numbers from your current blades when shopping at an auto parts store or online, and cross-reference with the store’s compatibility tool.


When in doubt, you can also bring the car or the old blades to a parts counter; most retailers can confirm the correct sizes for the 2015 QX60 based on the VIN or trim level.


Tips for replacing wiper blades


Replacement steps are generally straightforward: lift the blade arm, release the old blade, attach the new one using the specified hook or pin style, and lower the arm gently. Use the correct blade type (beam, conventional, or hybrid) recommended for your climate; in snowy or icy regions, consider winter blades or a combination style that offers better performance in low-temperature conditions.


Summary


The 2015 INFINITI QX60 typically uses 26-inch driver’s side and 18-inch passenger front blades, with a 12-inch rear blade. Always verify with your owner’s manual or by measuring the existing blades to ensure a perfect fit, as variations can occur by production run or trim. Replacing wiper blades is a quick maintenance task that improves visibility and safety on the road.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.