There isn't a universal TPMS reset button—the location and procedure vary by make and model. Some vehicles have a dedicated button, others require a relearn by driving, and in many cases you initiate the process via the vehicle’s settings menu or a service tool. Always consult your owner’s manual for the exact steps.
How TPMS reset works and what to expect
TPMS reset or relearn is needed after inflating tires to the correct pressure, rotating tires, or replacing sensors. The exact method can differ: some cars use a physical button, others relearn automatically when you drive, and some require a menu option in the infotainment or instrument cluster. For precise instructions, reference your vehicle’s manual or contact the manufacturer or a tire professional.
Common locations for a physical TPMS reset button
The following spots are where manufacturers sometimes place a dedicated TPMS reset switch. Not every vehicle has one, so check the manual if you don’t see it.
- Under the steering wheel on the lower dash or kick panel, often near a fuse box or headlight switch.
- In the glove box or on a side wall inside the glove compartment.
- In the center console storage area or near the gear selector.
- On the driver's door jamb or inside the driver’s door panel near the latch.
- In the trunk area near the spare tire well or on a fuse/relay panel in the trunk (less common).
Not all vehicles have a dedicated TPMS reset button; many rely on automatic relearn or on a settings-menu option instead.
How TPMS relearns without a dedicated button
On models without a physical reset button, you typically trigger a relearn through the car’s system or by driving. Common approaches include the following, which can vary by model and year.
- Drive at a steady highway speed (roughly 50 mph/80 km/h or higher) for 10–60 minutes with all tires inflated to the recommended pressures.
- Use the vehicle’s TPMS or Tire Pressure Calibration option in the settings or on the instrument cluster (for example: Settings > Vehicle > TPMS or Tires > Relearn). Follow the on-screen prompts.
- For some vehicles, turn the ignition to ON, select Relearn or Calibrate in the menu, then drive as instructed by the dash prompts.
- If a sensor was replaced or tires were swapped, a professional with a scan tool may be required to relearn the sensors.
Because exact steps differ by make and model, always check the owner’s manual for your specific year, make, and model or contact a dealership or tire shop if you’re unsure.
Summary
The TPMS reset location and method aren’t universal. Check your owner's manual and follow the model-specific instructions—whether that means pressing a physical button, using a settings menu, or simply driving at steady speeds with properly inflated tires. When in doubt, a dealer or tire shop can perform the relearn for you to ensure accurate readings.