There isn’t a single universal location for the oil filter on every 2022 Jeep—the spot depends on the model and engine. For the most common 3.6L Pentastar V6 used in many 2022 Jeeps, the filter sits on the engine block, but other engines have different layouts. If you share the exact model and engine, I can give precise directions.
Common engine locations
To help you identify where to look, here are typical locations by the main 2022 Jeep engines. Note that variations exist by trim and production changes.
- 3.6L Pentastar V6: The oil filter is usually a cartridge-style filter housed in a canister attached to the engine block. In many 2022 Jeeps, you’ll find it on the driver’s side near the front of the engine, sometimes behind a small shield or under a plastic cover. Access may require removing the shield or cover.
- 2.0L Turbo I-4: The filter is often a cartridge inside a canister mounted to the engine block, commonly on the passenger side. It’s typically reachable from above after removing a panel or shield.
- 3.0L EcoDiesel V6: The filter is usually cartridge-style in a canister at the front of the engine near the oil pan, occasionally behind a shield that must be removed for access.
- 5.7L Hemi V8: The filter location is commonly on the front of the engine, near the oil pan on the driver’s side, often behind a shield or heat shield that you’ll remove for service.
These are typical layouts. The exact spot can vary by model year, trim, and changes in production. If you can share your model, I’ll give you a pinpointed location.
Find the exact location for your 2022 Jeep
Use these steps to pinpoint the exact filter location for your specific vehicle. The steps assume you have basic hand tools and a level workspace.
- Identify your exact model and engine. Look in the owner's manual or under the hood badge to confirm the engine code (for example, 3.6L Pentastar).
- Park on a level surface and ensure the engine is cold before you touch anything.
- Open the hood and locate the engine block. If there is a plastic engine cover, you may need to remove it to access components underneath.
- Look along the sides of the engine block for a cylindrical canister or a round end-cap that resembles an oil filter. If you see a cap with notches or a hex, you’re likely dealing with a cartridge filter in a housing.
- Refer to the factory service manual or a VIN-specific diagram if you still can’t locate it. If necessary, contact a Jeep dealer or independent shop for the exact filter location on your build.
Be mindful of the oil drain plug and the drain pan position when performing an oil change, and always dispose of used oil and filters properly.
What to do if you still can't find it
If the filter isn’t obvious, try these options:
- Check the owner’s manual or a workshop manual for your exact model and engine code.
- Search Jeep service resources by VIN or model year for a diagram showing the oil filter location.
- Call or visit a Jeep dealer or a trusted mechanic who can point you to the exact location for your engine.
Having the right location ensures you can perform routine maintenance confidently and safely.
Summary
The oil filter location on a 2022 Jeep varies by model and engine, with the most common engines placing the filter on the engine block (front or side) behind shields or covers. For an exact spot, identify your model and engine code, consult the owner’s manual or service diagram, or ask a dealership/mechanic for a VIN-specific locator. With the right guidance, locating and servicing the oil filter becomes a straightforward task.