In short, the oil filter on a 2016 Ram 1500 sits on the engine block toward the front and is accessible from underneath; the exact location depends on which engine you have (5.7L Hemi, 3.6L Pentastar, or EcoDiesel).
The 2016 Ram 1500 offered several engine choices, and each arrangement can place the filter in a slightly different spot. This guide explains the general locations by engine family and provides practical steps to locate and replace the filter safely.
Engine variants and typical oil filter placement
5.7L Hemi V8
For the 5.7L Hemi, the oil filter is mounted on the engine block near the front and is typically accessible from underneath once any undercarriage covers are removed. Exact side and orientation can vary with exhaust layout and model, so if you don’t immediately spot it, check beneath the engine area.
3.6L Pentastar V6
On the 3.6L Pentastar, the filter is generally located toward the front of the engine, often on the side of the block that faces the underside of the vehicle. Access may require removing an undertray or splash shield.
3.0L EcoDiesel
The EcoDiesel version places the filter in a similar front‑area region of the engine block and is commonly reachable from underneath. Depending on the vehicle, a cartridge-style filter may be used, which can change the replacement approach slightly; consult the manual for specifics.
What you’ll need and how to approach it
Before you begin, gather the right tools and follow safety precautions. The steps below are general and may vary by the exact engine and trim. Always refer to the owner's manual or service manual for specific guidance and torque specs.
Useful steps to locate and inspect the oil filter on your 2016 Ram 1500:
- Park on level ground, engage the parking brake, and chock the wheels.
- If needed, raise the front of the truck and support it securely with jack stands; ensure stability before crawling underneath.
- Remove any splash shields or undercarriage panels to improve access to the engine area.
- Identify the oil filter by looking for a cylindrical canister with a threaded end or cap; it is located near the front of the engine block and may be partially obscured by components or shields.
- Place an oil drain pan under the filter, unscrew it counterclockwise, and let the oil drain completely before removing the old unit.
- Install the new filter by hand until snug, then reinstall any shields and top off the engine with the correct amount of oil as specified in the manual.
Note: Always consult the owner's manual for the exact oil type and capacity, filter part number, and torque specifications for your specific engine configuration.
Summary
The oil filter location on a 2016 Ram 1500 varies by engine family. In most configurations, you’ll find it mounted to the engine block near the front and accessible from underneath once shielding is removed. Because the exact placement can differ between the 5.7L Hemi, the 3.6L Pentastar, and the 3.0L EcoDiesel, checking the manual or a service diagram for your exact vehicle is the best way to confirm the precise location before attempting a replacement.
Where is the oil filter located on a 2015 Dodge Ram 1500?
And in this really tight terrible location is our oil filter that black canister right there. Oh I'm going to try to get that canister out. First.
Where is the engine oil filter located?
The oil filter is usually located beside the oil pan or under the hood of your vehicle near the engine. Place the collection pan under the filter. You can use a filter wrench to help remove.
Where is the oil filter in a RAM 1500?
Find the Ram 1500 oil filter's location on the lower right passenger side of the engine above the rack and pinion steering unit. Using an oil filter wrench, begin loosening the oil filter in a counterclockwise direction until it can be loosened by hand.
Where is the oil filter located on a 5.7 L HEMI?
And now I'm going to turn it. So you can see I'm turning. It. So that's fine and uh I can actually get to it from the front from the other side. So there's plenty of room. There.