The oil filter on a 2015 Ram 1500 with the 5.7 HEMI is mounted on the engine’s passenger side toward the front of the block, in a conventional spin-on canister above the oil pan. It’s accessible from the engine bay, though some trim levels or splash shields may obscure it.
Locating the filter in the engine bay
To locate it efficiently, follow these steps:
- With the hood open, look to the right-hand side of the engine (the passenger side if you’re standing in front of the truck).
- Find a cylindrical metal canister with a threaded end cap; this is the oil filter mounting. It is typically positioned near the front of the engine block and just above the oil pan.
- In some trucks the filter sits behind or near a small shield or bracket; you may need to peek around hoses and wiring or from the wheel well area to confirm its location.
Once found, the filter is designed to be removed by hand or with a filter wrench, depending on how tight it is. Ensure the engine is cool before touching the filter and have a pan ready to catch dripping oil.
Replacement notes and best practices
Understanding the exact location helps with maintenance and planning the oil change. Always consult the owner's manual for the correct oil grade and capacity, and follow Mopar-recommended service intervals. If you want a step-by-step replacement guide, many manuals provide a procedure for removing the old filter, draining the oil, and installing a new filter with a fresh gasket seal.
Practical cautions and access tips
Safety first: use jack stands or a lift if you need to work underneath; let the engine cool; use the correct filter size for your model; and wipe the area clean to prevent debris from entering the engine.
Summary
On a 2015 Ram 1500 with the 5.7 HEMI, the oil filter is a standard spin-on canister located on the passenger side of the engine block, near the front and above the oil pan. It is accessible from the engine bay and may be partially obscured by shields depending on trim. When changing the oil, replace the filter with the appropriate Mopar-approved unit and follow proper safety procedures.
What oil goes in a 2015 RAM 1500 5.7 HEMI?
SAE 5W-20 full synthetic oil
The RAM 1500 with the 5.7L V8 HEMI engine requires SAE 5W-20 full synthetic oil. Using synthetic oil means you can schedule oil changes for every 10,000 miles. Use seven quarts to refill after draining the old oil and replacing the filter.
Ask More
What kind of oil does a 2008 Dodge Ram 1500 4.7 take?
5W-20
AMSOIL OE 5W-20 100% Synthetic Motor Oil.
Ask More
How to reset oil life on RAM 1500 5.7 HEMI?
Position don't actually start the engine. Though. Now use the steering wheel arrow controls to find the oil life submen in the vehicle info section of your instrument cluster display.
Where is the oil filter on a 2016 RAM 1500?
Using a rag, clean any excess oil from around the drain plug area. Find the Ram 1500 oil filter's location on the lower right passenger side of the engine above the rack and pinion steering unit. Using an oil filter wrench, begin loosening the oil filter in a counterclockwise direction until it can be loosened by hand.
Ask More