There are two fuse boxes on a 2007 Honda Civic: one in the engine bay and one inside the cabin.
In detail, the engine bay fuse box sits in the engine compartment on the driver's side under a black rectangular cover. The interior fuse box is located on the driver's side kick panel beneath the dash, behind a small access panel. Each cover carries a diagram that shows which fuse protects each circuit. When replacing fuses, use the same amperage as indicated and consult the owner's manual for precise diagrams if needed.
Engine bay fuse box (under-hood)
Follow these steps to locate and inspect the engine bay fuse box.
- Location: In the engine compartment on the driver's side, near the strut tower; look for a black plastic lid labeled FUSES/RELAYS.
- Access: Remove the cover by lifting the tab and pulling it off; the inside of the lid shows a fuse diagram.
- What you’ll find: Fuses for major engine-related circuits; the diagram on the cover identifies each fuse’s purpose.
- Safety tip: With the engine off, avoid touching exposed metal parts and use the correct replacement fuse amperage.
After replacing any fuse, reattach the cover and confirm that the circuits listed on the diagram are functioning correctly.
Interior fuse box
Follow these steps to locate and inspect the interior (cabin) fuse box.
- Location: On the driver's side, under-dash panel on the lower portion of the dashboard or kick panel; you may need to remove a small access panel or the fuse box cover.
- Access: Remove the panel to expose the fuse box; the lid features a diagram for interior circuits.
- What you’ll find: Fuses for interior components such as lights, wipers, radio, power windows, and HVAC controls.
- Safety tip: Replace fuses with the same amperage rating as shown in the diagram to prevent electrical issues.
Once you’ve replaced a fuse, reassemble the panel and test the affected functions to ensure proper operation.
Summary
The 2007 Honda Civic uses two fuse boxes: one in the engine bay and one inside the cabin. Each box has a lid diagram showing fuse assignments. Always replace fuses with the correct amperage and consult the owner’s manual for exact diagrams and guidance if you’re unsure.