In a 2010 Honda Accord, there are two primary fuse panels: one in the engine compartment and another inside the cabin on the passenger side behind the glove box.
Knowing their locations helps with quick diagnosis of blown fuses and enables you to access the maps that show which fuse protects each circuit. The exact layout can vary by trim, but the two panels described here cover the standard electrical circuits for this model year.
Fuse box locations
Honda typically places the two main panels in these spots. Here's how to locate and access them in a typical 2010 Accord:
Engine compartment fuse box
Location: in the engine bay, beneath a rectangular black plastic cover labeled FUSE BOX. Access by lifting the cover; inside is a diagram showing fuse numbers, amperages, and circuits.
Interior cabin fuse box
Location: on the passenger side of the dash, behind the glove box. Open the glove box, release the damper if needed, and remove the cover to view the fuse map and circuits.
These two panels handle the vast majority of electrical circuits in the vehicle. If you can’t locate a panel, consult the owner’s manual or the inside of each cover for the exact layout.
Reading the fuse maps and replacing fuses
Before you start, ensure the ignition is off and, if needed, remove the key to avoid any electrical hazards. Each fuse box cover includes a map showing fuse numbers, amperage ratings, and their corresponding circuits. If a fuse blows, replace it with one of the same amperage rating.
Engine compartment fuse box contents
Fuses in this box protect major engine and powertrain systems, including the ECU, ignition, fuel system, and some relays. The exact fuses depend on the engine and trim.
Interior cabin fuse box contents
This panel covers interior electronics such as headlights, horns, instrument cluster, radio, HVAC controls, power windows/locks, and other cabin circuits.
If a fuse continues to blow after replacement, stop driving and seek professional service to diagnose a possible short or faulty component.
Summary
For a 2010 Honda Accord, your fuse box locations are the engine compartment (under a black plastic cover) and the interior cabin panel behind the glove box on the passenger side. Use the diagrams on each cover to identify fuses and amperages, replace only with the same rating, and consult the owner's manual or a dealer if problems persist.