The 2019 Honda CR-V uses SAE 0W-20 full-synthetic motor oil.
For the 1.5-liter turbocharged engine commonly found in U.S. models, Honda specifies 0W-20 full-synthetic oil, with a typical fill capacity of about 3.7 quarts (3.5 liters) including the filter. Under normal driving, oil changes are generally recommended every 7,500 miles, with more frequent service advised for severe conditions or extreme temperatures. Always verify the exact specification in your owner’s manual for your market.
Oil Type and Viscosity
The CR-V’s 1.5L turbo engine requires 0W-20 full-synthetic motor oil. This viscosity supports efficient cold starts and fuel economy across the vehicle’s operating range, as outlined by Honda.
Capacity and Change Intervals
The oil capacity is approximately 3.7 quarts (3.5 liters) with a full filter. Honda’s maintenance schedule typically calls for oil changes every 7,500 miles under normal driving conditions; more frequent changes are advised for severe driving conditions such as frequent short trips, heavy traffic, towing, or extreme temperatures.
Choosing the Right Oil
Use a high-quality 0W-20 full-synthetic oil that meets API SP or ILSAC GF-6 specifications. Honda recommends Honda Genuine 0W-20 for optimal performance, but other reputable brands that meet these specs are acceptable. Avoid thicker viscosities unless explicitly approved in the owner's manual.
Notes for Different Markets
Guidance above reflects the U.S.-market CR-V. Regional variations can occur by country or model year; always verify the exact specification for your vehicle's VIN with the owner’s manual or a Honda dealer.
Summary
Bottom line: For the 2019 Honda CR-V, use SAE 0W-20 full-synthetic motor oil, with an approximate capacity of 3.7 quarts including the filter. Change intervals are typically around 7,500 miles under normal driving, and the oil should meet API SP or ILSAC GF-6 standards. Always consult the owner’s manual for region-specific guidance.