The engine air filter is located in the engine bay, inside a rectangular housing on the passenger side; the cabin air filter is behind the glove box on the passenger side. Replacing both filters helps protect the engine and improve interior air quality.
Engine air filter location
The engine air filter is housed in a plastic intake box in the front portion of the engine bay, typically toward the passenger side. Access is gained by releasing the clips or latch on the housing cover.
Preparation for replacement
Below are the steps you can follow to locate and replace the engine air filter on most 2022 Telluride models.
- Park on a level surface, apply the parking brake, and switch off the engine.
- Open the hood and locate the rectangular engine air intake housing on the passenger side of the engine bay.
- Unclip or unlatch the housing cover to access the filter.
- Remove the old filter, noting its orientation (the filter has an arrow on the frame indicating airflow).
- Clean any debris from the housing using a clean cloth or compressed air if available.
- Place a new filter into the housing with the correct orientation, ensuring it sits evenly.
- Reattach the housing cover and secure the clips or latch.
- Close the hood and start the engine to confirm proper airflow and absence of vibrations or leaks.
Ensure the intake housing is sealed properly and that no clips are loose after replacement.
Cabin air filter location
The cabin air filter sits behind the glove box on the passenger side, hidden behind a small cover. Access requires lowering the glove box and removing the filter cover.
Preparation for replacement
Follow these steps to replace the cabin air filter in a 2022 Telluride:
- Park the vehicle and set the parking brake; turn off the ignition.
- Remove items from the passenger-side footwell and open the glove box.
- Gently press the sides of the glove box to release the dampers and lower the box.
- Remove the cabin air filter cover, noting the orientation guides, and take out the old filter.
- Wipe the housing clean, then insert the new filter with the arrows facing the cabin.
- Reattach the cover and lift the glove box back into place, ensuring the dampers click into position.
Double-check that the glove box closes smoothly and that the filter is fully seated in its housing.
Maintenance reminders
Vehicle manuals typically recommend cabin filter replacement every 15,000–30,000 miles or once a year, depending on driving conditions. Engine air filters are usually replaced every 20,000–40,000 miles; however, refer to the owner's manual for the exact interval for your trim. If you notice reduced airflow, odors, or performance issues, inspect the filters sooner.
As always, refer to the 2022 Kia Telluride owner’s manual or consult a Kia dealership for model-specific instructions and filter part numbers, as configurations can vary by market and trim level.
Summary
In the 2022 Kia Telluride, the engine air filter resides in the engine bay's intake housing on the passenger side, while the cabin air filter is tucked behind the glove box on the same side. With basic tools and care, both filters can be replaced at home, helping maintain engine efficiency and interior air quality. Regular checks can prevent reduced performance and ensure a fresher cabin environment.