Front wiper blades for the 2020 Chevrolet Equinox are typically 24 inches on the driver's side and 19 inches on the passenger's side, with an 11-inch rear blade if your model has a rear wiper. Always verify fitment on your specific vehicle using the door jamb sticker or the owner's manual, since sizes can vary by trim and regional spec.
Front wiper blade sizes
Use the following sizes as a baseline for most 2020 Equinox models in North America. Confirm before purchase to avoid incorrect fit.
- Driver-side front blade: 24 inches
- Passenger-side front blade: 19 inches
- Rear window blade: 11 inches (if equipped)
These sizes cover typical configurations. If your door jamb sticker or owner's manual lists a different size, follow those figures. Rear wiper size can vary or be absent on some trims.
Variations by market or trim
Some regions or trims may use slightly different lengths (for example, 23" or 18" front blades). Check the door sticker near the driver's door or consult GM service information for your VIN to confirm the exact fit.
Choosing the blade type
Blade technology matters for long-term performance. Here's a quick guide to options typically available for the Equinox.
- Beam blades — provide continuous contact across the windshield and perform well in freezing rain and snow; usually last longer in winter weather.
- Conventional blades — affordable and common, but may wear more quickly and require more frequent replacement.
- Hybrid blades — combine features of beam and conventional designs for easier handling and good wiping performance.
In winter climates, many drivers prefer beam or hybrid blades for reliability, while in milder areas conventional blades may suffice.
Seasonal considerations
In regions with heavy snow or ice, consider winter-rated blades or a winter blend blade to improve performance when temperatures drop.
Recommended brands and fitment guidance
Quality aftermarket blades from reputable brands ensure proper fit and performance. Use blades sized for 24" and 19" front and 11" rear, or opt for a pre-marked GM-fit kit if available.
- Bosch ICON or Bosch Exact Fit sets that include 24" and 19" front blades
- Rain-X Latitude Water Repellent front blades in 24"/19" sizes
- ACDelco UV+ or Original Equipment replacements for GM vehicles
- Valeo, Denso, or Michelin options sized for 24"/19" front and 11" rear where available
Check the packaging for exact blade lengths and compatibility with your 2020 Equinox's VIN, as some regions use slight length variations.
Installation tips
Replacing blades on the Equinox is straightforward. Follow these steps for a secure fit and optimal contact with the windshield.
- Raise the wiper arm away from the windshield until it rests on its safety stop.
- Press the small release tab on the blade and slide the old blade out of the hook.
- Attach the new blade by sliding it into the hook until you hear a click.
- Lower the arm slowly back to the windshield and test sweep to ensure proper seating.
Always handle the wiper arms gently to avoid bending or breaking the arms. Dispose of old blades responsibly.
Summary
The 2020 Equinox front wiper blades are typically 24" on the driver side and 19" on the passenger side, with an 11" rear blade if present. Choose between beam, conventional, or hybrid blade styles based on climate and preference, and buy from trusted brands such as Bosch, Rain-X, or ACDelco. Verify exact sizes using the door jamb sticker or VIN-specific product listings to ensure a precise fit.