The 2016 Jeep Compass typically uses Mopar ATF+4 automatic transmission fluid for its transmission. In North American models with the common 9‑speed automatic, ATF+4 is the required fluid. Always verify with your owner's manual or dealer since specifications can vary by market and configuration.
The 2016 Compass lineup covers multiple markets and configurations, and transmission fluid requirements are specific to the transmission type installed on your vehicle. Using the wrong fluid can lead to shifting issues or damage, so this article explains the standard fluid type and how to confirm the correct specification for your specific ute.
Understanding the transmission setup in the 2016 Compass
Most 2016 Compass models sold in North America came with a modern automatic transmission paired to the 2.4L engine. Mopar’s ATF+4 specification governs maintenance and fluid requirements for that transmission, ensuring proper hydraulic performance and lubrication. Regional variants can differ, so it’s important to confirm the exact specification for your vehicle.
ATF+4: the standard specification
ATF+4 is Mopar’s automatic transmission fluid specification used by FCA transmissions such as the 9‑speed automatic in the 2016 Compass. Using ATF+4 helps maintain smooth shifts and transmission longevity.
Approved transmission fluids for the 2016 Compass
Here are the typical approved options you might encounter; ensure any product you buy explicitly states compatibility with Chrysler ATF+4.
- Mopar ATF+4 (official Chrysler/Jeep fluid; commonly sold under part number 05018063AA).
- Third-party ATF+4 fluids that explicitly meet Chrysler ATF+4 specification (look for ATF+4 compatibility on the label).
Avoid fluids that only list Dexron VI or Mercon compatibility, as these are generally not approved for the 2016 Compass transmission and could cause shifting problems or damage.
How to service or replace the fluid
When performing a routine transmission service, follow the owner's manual. Typical steps include draining the pan, replacing the filter if applicable, refilling with ATF+4 to the correct level, and avoiding cross-contamination with other fluids. A full flush should be performed only if recommended by the service manual or a dealer.
- Drain-and-fill: remove the pan, drain old fluid, replace the filter (if present), reseal the pan, and refill with ATF+4.
- Full flush: use appropriate equipment and only if recommended by the manual or dealer.
Always use ATF+4 and avoid mixing fluids. If you’re unsure, consult a Jeep dealer or certified technician.
Summary
In short, the 2016 Jeep Compass generally requires Mopar ATF+4 automatic transmission fluid for its transmission, particularly in North American models with the 9‑speed automatic. To confirm the exact fluid for your vehicle, consult the owner’s manual, check the under-hood/transmission label, or contact a Jeep dealer. Using ATF+4 ensures proper shifting, protection, and long-term reliability.