It uses Mopar ATF+3 power steering fluid (Chrysler ATF+3).
Official specification for the 2000 Grand Cherokee
The 2000 Grand Cherokee’s hydraulic power steering system is designed to operate with Mopar ATF+3. This is the approved specification from Chrysler for the PS reservoir. Using ATF+3 helps preserve seals and steering feel. Substituting fluids not labeled ATF+3 is not recommended without expert guidance.
How to verify the correct fluid for your vehicle
To confirm the right fluid for your exact vehicle and production date, use these checks:
- Inspect the reservoir cap and nearby labels for an ATF+3 specification or explicit Power Steering Fluid guidance.
- Consult the owner's manual or service bulletin for the power steering fluid requirement.
- If the documentation is unclear, contact a Jeep dealership or a certified mechanic with your VIN to confirm ATF+3 compatibility.
- When topping off or replacing, use ATF+3 and follow the proper bleeding procedure to remove air from the system.
Following these steps helps ensure you use the correct fluid and maintain steering performance.
Additional considerations
While ATF+3 is the official spec for this model year, some service outlets may reference older Dexron variants. If your vehicle’s reservoir or service records indicate a different specification, verify with a dealer before proceeding. Properly bleeding the system after any fluid change is essential to avoid steering noise or pinch points.
Summary
For a 2000 Jeep Grand Cherokee, the recommended power steering fluid is Mopar ATF+3. Confirm the exact spec with your manual, reservoir markings, or a Jeep dealer if you’re unsure, and ensure the system is bled after any fill or drain. This helps maintain proper steering performance and seal integrity.