The quick answer: use 5W-20 motor oil that meets API SN (or newer) standards, in about 3.7 quarts with a filter. You can choose conventional, synthetic blend, or full synthetic based on climate, budget, and maintenance preference.
Oil specifications for the 2008 Honda Fit
For most markets, Honda’s 2008 Fit specification centers on a 1.5-liter engine that requires a 5W-20 viscosity. The oil should meet API SN or newer, and you have flexibility to run conventional, synthetic blend, or full synthetic oil—as long as the oil meets the service standard. The total oil capacity with a new filter is approximately 3.7 quarts.
Before purchasing oil, confirm the exact requirements in your owner's manual or with a Honda dealer, since regional variations can occur depending on the engine variant and market.
Options that typically work for the 2008 Fit include the following, all at 5W-20 viscosity and API SN or newer standard:
- 5W-20 conventional motor oil (API SN or newer)
- 5W-20 synthetic blend motor oil (API SN or newer)
- 5W-20 full synthetic motor oil (API SN or newer)
All of these choices meet the required viscosity and API service category, giving you flexibility on price, availability, and performance preferences.
Climate and driving considerations
In very cold climates, some owners consider alternative viscosities if recommended by their manual or dealer; however, 5W-20 remains the standard for most 2008 Fit variants. Always verify the specific recommendation for your engine code and market to ensure optimal lubrication on cold starts and in hot-running conditions.
Maintenance intervals and practical tips
Oil-change intervals depend on the oil type and driving conditions. General guidance for the 2008 Fit is:
- Conventional oil: roughly every 3,000–5,000 miles (about 4,800–8,000 km)
- Synthetic oil: roughly every 5,000–7,500 miles (about 8,000–12,000 km)
Always follow Honda’s official maintenance schedule for your vehicle, and reset the oil-change indicator if your model is equipped with one after each change.
Summary
For a 2008 Honda Fit, the standard recommendation is 5W-20 oil that meets API SN or newer, with an approximate capacity of 3.7 quarts including the filter. You may use conventional, synthetic blend, or full synthetic oil based on climate, budget, and personal preference. Always check your owner's manual or consult a Honda dealer to confirm the exact specification for your engine and market.