The Dodge Avenger’s oil requirement depends on the year and engine; the most common specification is 5W-20 motor oil for the four‑cylinder versions, with 5W-30 used in some situations. Always check your exact manual or under-hood label for the correct specification.
Engine options and oil requirements
2.4L World Gasoline Engine (2007–2014)
The 2.4L World Gasoline engine in most Avenger models is designed to run on oil that meets API SN/SM with ILSAC GF‑5, and Chrysler MS‑6395 specifications. The recommended viscosity is typically 5W‑20, and synthetic blends or full synthetic oils are acceptable. The oil capacity is around 4.5 quarts with a filter. In very hot climates or under heavy driving, 5W‑30 can be used if your manual specifies it. Always verify the exact requirement for your vehicle’s year and configuration.
2.7L V6 engine (older Avenger models)
Some earlier Avenger versions used a V6 option (often around 2.7L). For these engines, the manual commonly calls for 5W‑30 oil, with synthetic blends or full synthetic acceptable. The usual oil capacity is about 5 quarts with a filter. As with the 4‑cylinder, confirm the precise specification for your year and model in the owner’s manual or on the under‑hood label.
How to confirm the right oil for your car
To be certain you’re using the correct oil for your Dodge Avenger, follow these steps: check the owner's manual, look at the under-hood oil fill cap and the engine oil label on the dipstick area, or consult a Dodge dealer or trusted mechanic. The sticker on the radiator support or inside the fuel filler door may also show the required viscosity and specification.
Summary
For most 4‑cylinder Dodge Avengers (2.4L), use 5W‑20 oil that meets API SN/SM and Chrysler MS‑6395, with synthetic blends or full synthetic options. In hot climates or special conditions, 5W‑30 is sometimes acceptable if the manual allows it. For older V6 variants, 5W‑30 is commonly used, but always verify against your year’s exact specifications. When in doubt, refer to the owner’s manual or the service sticker on the vehicle for the precise oil type and capacity, and follow recommended oil-change intervals.
What oil do I need for a 2010 Dodge Avenger?
5 liters 5W-20 Dodge Avenger motor oil and oil filter for 2008-2014 2.4L 24V applications. Oil meets Chrysler MS-6395 oil standard.
What oil does a 2011 Dodge Avenger 2.4 take?
AMSOIL Extended-Life 5W-20 100% Synthetic Motor Oil.
What oil does a 2008 Dodge Avenger take?
5W-20
Oil Grade: API*
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
Can I use 5W-30 instead of 5W20 in my Dodge?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.