The 2016 Honda CR-V uses a cartridge-style oil filter inside the engine, not a traditional spin-on canister. Replacement involves swapping the cartridge element itself and the accompanying O-ring on the housing. This setup is typical for the 2.4-liter four-cylinder engine used in that model year.
The 2016 CR-V, part of the late-4th generation in North America, relies on a 2.4L i4 engine. Its oil filtration system is a cartridge-type unit housed within the engine bay. When you service the oil, you replace the cartridge filter element and the O-ring seal on the housing cap, rather than a disposable spin-on filter. This article explains what that means, where to find it, and how to perform the replacement safely.
Understanding the cartridge-style oil filter
Before diving into replacement details, it helps to know how cartridge filters differ from traditional spin-on filters and what to expect in a typical service for the 2016 CR-V.
- The filter is a cartridge element inside a housing, rather than a metal canister you unscrew and replace.
- During service, you replace the cartridge element and the small O-ring seal on the housing cap.
- The system is designed for Honda’s 2.4L engine used in the 2016 CR-V; newer trims with different engines may use other configurations.
- Access and replacement steps are straightforward with basic hand tools, but you may need to remove a splash shield or access panel depending on trim.
In short, you’re dealing with a cartridge-style filter that sits in a housing, not a spin-on filter. Always use a proper cartridge-filter kit designed for the 2.4L engine and replace the O-ring to ensure a proper seal.
How to replace the oil filter on a 2016 Honda CR-V
If you’re performing your own oil change, follow these general steps to replace the cartridge filter and complete the service. Always consult the owner’s manual for exact torque specs, oil grade, and capacity for your region and trim.
- Warm the engine briefly and place the vehicle on a level surface; gather your replacement cartridge filter, O-ring, and fresh oil.
- Drain the engine oil by removing the drain plug and allowing the oil to fully drain into a suitable pan.
- Remove any splash shield or accessory panels that cover the oil filter housing to gain access.
- Unscrew and remove the oil filter housing cap to expose the cartridge element.
- Carefully remove the old cartridge, then install the new cartridge and the new O-ring on the housing cap.
- Lightly lubricate the new O-ring with clean engine oil, reassemble the housing cap, reinstall any shields, refill with the recommended oil, and check for leaks.
Concluding: Replacing the cartridge filter on the 2016 CR-V is a manageable task for a DIY enthusiast, provided you use a compatible cartridge filter and O-ring kit and follow the recommended oil type and capacity.
Part numbers and compatibility
For accuracy, check your regional Honda parts catalog or a reputable parts supplier to confirm the exact cartridge filter and O-ring numbers for your 2016 CR-V’s engine. Genuine Honda parts are typically labeled for the 2.4L engine used in that year, but some aftermarket filters marketed as compatible with 2012–2016 CR-Vs may also be offered. Always verify compatibility with your vehicle’s VIN or engine code and replace the accompanying O-ring to ensure a proper seal.
Summary
The 2016 Honda CR-V uses a cartridge-style oil filter housed inside the engine rather than a spin-on filter. Replacement involves swapping the cartridge element and the O-ring on the housing cap, not a full Canister. With the correct cartridge filter kit and basic tools, the process is straightforward. Always follow the vehicle’s manual for exact specifications, and consider professional service if you’re unsure about the steps or tools required.
Where's the oil filter on a 2016 Honda CRV?
Right here i'm going to go ahead and get my wrench because that looks like a pretty tight. Space. Break that loose. And give it a good spin. Let that oil drain out and then remove your oil. Filter.
What oil filter does my 2016 Honda CRV take?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.
What is the best oil filter for Honda CR-V?
- STP Extended Life Premium Oil Filter S7317XL.
- Honda Spin-On Canister Engine Oil Filter 15400-PLM-A02.
- STP Extended Life Engine Oil Filter S3387AXL.
- STP Extended Life Engine Oil Filter S5XL.
- STP Extended Life Engine Oil Filter S8AXL.
- STP Engine Oil Filter 15400-PLM-A02.
- Mobil 1 Extended Performance Premium Oil Filter M1-108A.
What is the oil filter number for a 2016 Honda?
15400-PLM-A02
This OEM Honda oil filter, part number 15400-PLM-A02, fits select Honda vehicles from model years 2000 all the way to 2021. Its job is to collect both the impurities in motor oil and whatever else accumulates as the oil lubricates engine parts.