How to change wipers on Kia Sportage 2017?

The quick answer: identify the correct blade sizes for your 2017 Kia Sportage, safely remove the old blades from the wiper arms, snap in the new blades until they click, and then test the sweep to ensure a clear wipe. The steps below cover how to determine sizes, remove the old blades, install new ones, and verify proper operation.

Identify the right blades for your 2017 Sportage

Determining blade size and attachment type is essential to a proper fit. The 2017 Sportage commonly uses a driver-side blade around 26 inches and a passenger-side blade around 18 inches, but sizes can vary by trim and market. Confirm by checking the old blades for length markings or your owner's manual, and verify the wiper-arm attachment (often a J-hook or pin adapter) so you buy blades with the correct connector.

• Inspect the current blades for length markings along the edge or measure from the joint to the tip to determine sizes.


• Check the wiper-arm connector on the blade: common types include J-hook, pin, or side-lock adapters. Make sure the replacement blades include the matching adapter.


• Obtain blades sized for the driver and passenger sides, and choose OEM or reputable aftermarket blades designed for the 2017 Sportage or equivalent.


• If in doubt, ask a parts counter or consult Kia's official parts site or the owner's manual to confirm exact lengths for your vehicle's market.

Having the correct sizes and connector type ensures a smooth install and reliable contact with the windshield.

Remove the old wiper blades

With the right blades on hand, the next step is to safely remove the current ones without damaging the glass or the arms.

• Lift each wiper arm away from the windshield until it stays in a stable elevated position.


• Identify the release mechanism on the blade’s connector. For a typical J-hook attachment, press the release tab; for a pin or side-lock, release as required by the design.


• Slide the blade straight down or toward the end of the arm to disengage it from the hook or pin, and set it aside. Repeat for the other side.


• Place removed blades somewhere safe to avoid bending or damaging the reflective surfaces.

With the old blades removed, the wiper arms are ready for the new blades.

Install the new wiper blades

Attach the new blades to the arms, ensuring they click into place and are secured before returning them to the windshield.

• Align the new blade’s connector with the wiper arm’s attachment point (J-hook, pin, or other).


• Slide the blade onto the arm and press until you hear or feel a click, indicating the blade is locked in place. For some adapters, you may need to rotate the blade slightly to lock.


• Repeat the process on the other side, if replacing both blades.


• Gently lower the arms back onto the windshield.

Once installed, you should test the sweep to ensure proper contact with the glass and that the blades park correctly when turned off.

Test, care, and tips

Final checks ensure the blades perform well and last longer between changes.

• Turn on the ignition and run the wipers at low and high speeds to check for smooth movement and any streaking or skipping.


• If streaks or skips occur, reseat the blade, or consider a different blade type or size to improve contact with the glass.


• Clean the windshield and blade edges to remove dust, grime, or debris that can cause streaking.


• Ensure the blades rest in the correct park position and aren’t rubbing on the hood or trim when off.

Regularly inspect blades for wear and replace them promptly to maintain visibility in adverse weather.

Summary

Changing wipers on a 2017 Kia Sportage is a straightforward process: confirm the correct blade sizes and attachment type, safely remove the old blades, install new ones until they click, and test the sweep to verify a clean, streak-free wipe. If you’re unsure about the exact sizes, consult the owner’s manual or your preferred auto parts retailer to confirm the precise lengths for your specific vehicle configuration and market.

Can I remove wiper arms without a special tool?

I often remove wiper arms using a wrench, when I haven't got any locking pliers around.

How to pull up wipers on Kia Sportage?

As if it was just for the very first time. So you come in. And you hop inside and on a push button. Start. It's very important that you turn the vehicle to on so start the car essentially. And then go

How to change wiper blades on a 2017 Kia Sportage?

Them first turn off the engine. And lift the wiper switch to mist which is the uppermost. Position for 2 seconds. This will raise the wiper arms to the highest.

What size wiper blades do I need for my 2017 Kia Sportage?

2017 Kia Sportage Wiper Blades Size/Price Chart