The 2022 Honda Civic takes 0W-20 full-synthetic engine oil. This applies to the common engines in the lineup, including the 1.5-liter turbo and the 2.0-liter baseline engine. Use oil that meets API SN or newer and is suitable for Honda engines.
Engine options and oil requirements
Two engines power the 2022 Civic, but both share the same oil viscosity and basic spec requirements. Here is what you need to know about selecting the right oil.
- 0W-20 viscosity, full-synthetic engine oil
- Oil should meet or exceed API SN (or newer) standards; many brands also advertise ILSAC GF-6 compatibility
- Honda recommends using genuine Honda oil or an equivalent 0W-20 synthetic that meets Honda's specs
In practice, this means you can confidently choose any reputable 0W-20 full‑synthetic oil that meets API SN or newer. Always verify the oil specification on the product label and, if in doubt, consult your owner's manual or a Honda service advisor.
Oil capacity and change guidelines
Oil capacity and the exact change interval can vary by engine and trim, so consult the owner's manual for precise numbers. The Civic typically uses around 3.7 quarts (3.5 liters) of 0W-20 oil with the filter, but capacity can vary by engine variant and year; always verify with your specific model and engine code.
- Capacity varies by engine; check the owner's manual for the exact figure
- Recommended change interval under normal driving is commonly about every 7,500 miles (12,000 km); shorter in severe conditions
- Always replace the oil filter when changing the oil
Following these guidelines helps ensure proper lubrication and engine longevity. When in doubt, consult a dealer or certified technician for service.
Summary
The 2022 Honda Civic runs on 0W-20 full-synthetic oil, with selection guided by the API SN or newer standard. Ensure you use a high-quality 0W-20 oil, change including the filter on schedule, and refer to the owner's manual for exact quantities and intervals for your specific engine variant.