The 2020 Honda Fit requires 0W-20 full-synthetic engine oil, about 3.7 quarts (3.5 liters) with a new filter. The oil should meet API SN or higher and be compatible with ILSAC GF-6 standards where available.
Oil specifications and capacity for the 2020 Fit
Key details to ensure you buy the right oil and perform a proper change.
- Oil viscosity and type: 0W-20, full-synthetic engine oil. Use oil that meets API SN (or higher) and is ILSAC GF-6 compatible.
- Oil capacity (including filter): Approximately 3.7 quarts (3.5 liters).
- Recommended change interval: about every 7,500 miles or 12 months under normal driving conditions; more frequent under severe service or extreme climates.
Make sure to replace the oil filter with every oil change and consult the owner's manual or dealer for any model-specific variations.
Bottom line: Use 0W-20 full synthetic oil, roughly 3.7 quarts with a new filter, and change it every 7,500 miles or 12 months under typical conditions.
Additional context
Climate and driving considerations
Honda guidance emphasizes using oil that meets or exceeds API SN, with GF-6 compatibility common for modern 0W-20 oils. In extreme temperatures or demanding driving, verify the climate-appropriate viscosity recommendations in the owner's manual.
Summary
The 2020 Honda Fit takes 0W-20 full-synthetic motor oil, about 3.7 quarts with a new filter, with a typical maintenance interval of 7,500 miles or 12 months under normal driving. Use a brand that meets API SN or higher and is GF-6 capable, and refer to the owner's manual for any model-specific notes.