The typical setup for a 2013 Hyundai Veloster Turbo is HID projector headlights with ballast for the low beams, using D2S or D3S bulbs, while fog lights usually use H11 halogen bulbs and high beams are commonly 9005 halogen. Your exact configuration can vary by trim or aftermarket changes, so verify by inspecting the headlight assembly or consulting the owner’s manual.
Headlight configurations can differ based on factory options and subsequent modifications. This guide explains how to identify your specific bulb types and lists the common combinations you might encounter, so you can purchase the correct replacements and avoid beam misalignment or fitment issues.
How to identify your headlight configuration
To determine the exact bulb types for your Veloster Turbo, start with a quick physical check and then confirm with documentation or a parts diagram.
- Inspect the back of the headlight housing for a ballast or igniter. A ballast indicates an HID low-beam system, which uses bulbs like D2S or D3S.
- Remove the bulb cap and read any markings on the bulb base or the bulb itself. HID bulbs will be labeled with D2S or D3S, while halogen bulbs will show H7, H11, or similar H-series Designations.
- Check the owner’s manual, window sticker, or a Hyundai service bulletin for your VIN to confirm the exact specification for your trim.
Conferring the presence of a ballast and the bulb markings will help you order the correct replacement without guesswork.
Common configurations you might find
These are the typical headlight setups seen on 2013 Veloster Turbo vehicles. Use the identification steps above to confirm which applies to your car.
- Factory HID low-beam with ballast: D2S or D3S bulbs, fog lights usually H11, high beams typically 9005 halogen.
- Halogen projector low-beam (no HID ballast): H7 bulbs, fog lights H11, high beams 9005.
Knowing which configuration your car has helps ensure you buy the correct bulbs and avoid compatibility issues with beam pattern and electrical components.
Replacement basics and shopping tips
When shopping for bulbs, verify the exact bulb type and consider compatibility with any existing ballasts or headlight assemblies. Mismatched bulbs can affect beam pattern and longevity.
- For HID low-beam: confirm whether your system uses D2S or D3S bulbs by checking ballast labeling or bulb markings.
- Fog lights: common halogen options are H11; verify if your specific housing uses H11 or an H11B variant.
- High beams: most Veloster Turbos use 9005 halogen bulbs; confirm if your car uses a separate HID high beam (less common for this model year).
- Consider OEM or reputable aftermarket bulbs and ensure any required ballast or wiring harness remains compatible with your vehicle’s electrical system.
Upgrading or replacing bulbs with proper compatibility preserves beam performance and safety on the road.
Summary
The 2013 Hyundai Veloster Turbo generally uses HID projector headlights with ballast for low beams (D2S or D3S), H11 for fog lights, and 9005 for high beams, though some cars may have halogen low beams (H7). To avoid guesswork, inspect the ballast, read bulb markings, and check the owner’s manual or a parts diagram to confirm the exact bulb type for your vehicle. Always replace bulbs with matching type and rating to maintain proper beam pattern and safety.