The 2019 Nissan Versa uses SAE 0W-20 full synthetic engine oil, with a fill capacity of roughly 3.7 quarts including the filter. This specification supports efficient cold-start performance and fuel economy.
Choosing the right oil matters for engine longevity, performance, and warranty coverage. Nissan’s manual for the Versa specifies the oil grade and certification you should use, and adhering to those guidelines helps protect the 1.6-liter engine across different climates and driving conditions.
Oil type and specifications
The Versa’s 1.6-liter engine is designed to run on modern, API-certified oil that meets ILSAC GF-5 (or higher) standards. Nissan commonly specifies SAE 0W-20 full-synthetic motor oil for this model, which provides good cold-start flow and low-viscosity protection while supporting fuel economy. The approximate oil capacity is about 3.7 quarts with a replacement filter. For compatibility, choose a reputable brand that meets API SN (or higher) and ILSAC GF-5 (or GF-6) standards and confirms the 0W-20 viscosity.
When shopping for oil, look for products labeled as 0W-20, and verify that they meet the vehicle’s API and ILSAC certification requirements.
Here are the common oil options you might encounter when shopping for Versa oil:
- SAE 0W-20 full synthetic motor oil (recommended)
- SAE 0W-20 synthetic blend motor oil (acceptable if full synthetic is unavailable, but confirm it meets API/ILSAC specs)
Using the recommended 0W-20 oil helps maintain the Versa’s fuel efficiency and engine protection. If you have climate-specific concerns or unusual driving conditions, consult the owner's manual or a Nissan service professional for guidance.
Maintenance and replacement intervals
Oil-change intervals depend on the type of oil used and driving conditions. The Versa's manual outlines schedules for conventional versus synthetic oil, with severe service scenarios (short trips, heavy traffic, dusty environments) typically shortening the interval. Always replace the oil filter at every oil change and use the correct oil grade and capacity as specified.
Summary
For a 2019 Nissan Versa, the recommended engine oil is SAE 0W-20, ideally full synthetic, with a capacity around 3.7 quarts including the filter. Use brands that meet API SN or higher and ILSAC GF-5 or GF-6 specifications, and follow the maintenance schedule in the owner's manual to keep the engine running smoothly and efficiently.