Typically, replacing a catalytic converter on a Jeep Liberty costs about 900 to 2,500, depending on how many converters need replacement, the type of converter, and local labor rates.
What drives the price
The cost of replacing a catalytic converter is influenced by several variables, from the system layout to the choice of parts and the shop's labor rate. The factors most commonly affecting the bill are:
- Whether the Liberty uses one or two catalytic converters in its exhaust system
- The engine option and model year, which can affect part availability and complexity
- OEM factory parts versus aftermarket or universal-fit converters
- Labor rates at the service shop and regional price differences
- Whether other components (like sensors) must be replaced or relocated during the job
These factors help explain why quotes for the same vehicle can vary significantly between shops and regions.
Typical price ranges when installed
Prices vary based on converter type (aftermarket vs OEM) and whether there is one or two catalysts in the Liberty’s exhaust. The ranges below reflect installed costs (parts plus labor) commonly seen in the United States as of 2024–2026.
- Single catalytic converter (aftermarket/direct-fit): Part roughly $250–$600; labor about $100–$300; total installed about $350–$900.
- Single catalytic converter (OEM/replacement): Part roughly $600–$1,200; labor about $150–$350; total installed about $750–$1,550.
- Two catalytic converters (aftermarket): Parts roughly $450–$1,000; labor about $250–$500; total installed about $700–$1,500.
- Two catalytic converters (OEM): Parts roughly $1,000–$2,000; labor about $300–$600; total installed about $1,300–$2,600.
Note that in states with strict emissions rules (such as California) you may be required to install CARB-certified converters, which can raise parts costs and affect availability.
What to consider before replacing
Before committing to replacement, consider the vehicle’s diagnosis. A confirmed failing catalytic converter should be replaced with a suitable unit, but some symptoms can mimic a clogged CAT (like misfiring or an exhaust restriction from other causes). Obtain multiple written quotes, confirm the number of converters involved, and ensure the quote includes disposal of the old parts and any necessary sensors or gaskets.
To maximize value, shop around for aftermarket direct-fit converters with warranties, and compare with OEM pricing. Some shops offer bundled exhaust services or diagnostic packages that can save money if other exhaust components also need attention.
Summary: The total cost hinges on how many converters you need, the part quality, and local labor rates. In most cases, plan for a installed price in the roughly $900 to $2,500 range, with higher figures if you require OEM parts or two converters.
Summary: For a Jeep Liberty, start by confirming whether your model has one or two catalytic converters, whether you want OEM or aftermarket parts, and then obtain several quotes to secure the best balance of price and warranty. Always verify that the converter is CARB-compliant if you live in a state with strict emissions standards.