What size hub bore is a 2000 Honda Civic?

The hub bore size for the 2000 Honda Civic is 56.1 mm (2.21 inches).

This article explains what that size means for wheel fitment, how to verify it on your car, and practical guidance for using aftermarket wheels or hub rings with a 2000 Civic. It will help you understand centering, compatibility, and common pitfalls when replacing wheels.

Understanding hub bore and wheel fitment

The hub bore is the central hole in a wheel that fits over the vehicle’s axle hub to center the wheel during rotation. Getting the bore size right is essential for proper centering and to minimize vibrations. If a wheel’s center bore is larger than the hub, a hub-centric ring can be used to ensure precise alignment. If the bore is smaller than the hub, the wheel will not mount properly.

Stock center bore for the 2000 Civic

For a 2000 Honda Civic (sixth generation), the stock center bore is 56.1 mm. This size is common for many Civic and related Honda wheels from that era, and it helps determine compatibility with OEM wheels and a wide range of aftermarket rims designed for 56.1 mm hubs.

Note: Some wheel catalogs list variant center bores around 56.1–56.5 mm depending on the exact wheel design and production year. If you are pursuing a wheel with a different bore, you may need a hub-centric ring to ensure precise centering.

The exact bore should be verified by measuring the hub opening or checking the vehicle’s service data, as minor manufacturing tolerances can exist between models and years.

Common considerations for aftermarket wheels

When selecting aftermarket wheels for a 2000 Civic, consider the following to ensure a proper fit beyond the bore size:

• Bolt pattern: 4x100 on most Civics from this era; verify for your exact trim and market.


• Wheel width and offset: ensure clearance with suspension, brakes, and fenders.


• Center bore of the wheel: many aftermarket wheels have bore sizes larger than 56.1 mm; a hub ring may be recommended for precise centering.

Using hub rings helps prevent vibrations and ensures the wheel is centered on the hub, especially with aftermarket wheels that have a larger bore than the vehicle hub.

How to verify the hub bore on your car and wheels

Use these steps to confirm the hub bore size for your specific vehicle and wheel combination:

• Check the owner's manual or a Honda service bulletin for the exact hub bore specification for your model year.


• Measure: remove the wheel, measure the inner diameter of the hub bore on the car, and compare to the wheel's center bore size.


• Consult with a professional or the wheel manufacturer to confirm compatibility and whether hub rings are recommended.

Keep in mind that even if a wheel's center bore is larger, a hub ring can provide the necessary centering and help prevent vibration.

Summary

For a 2000 Honda Civic, the stock hub bore is 56.1 mm. When selecting wheels, ensure the wheel's center bore is at least 56.1 mm or use a hub ring if the bore is larger, and verify compatibility for bolt pattern and offset as well. If you are unsure, consult a dealer or a qualified tire shop to confirm the exact bore size for your specific vehicle and wheel choice.

What is the center bore of a 2000 Honda CRV?

64.1mm
First Generation (1997-2001)
These models came equipped with: Standard rim size: 15 x 6 inches. Bolt pattern: 5×114.3mm (also referred to as 5×4.5 inches) Center bore: 64.1mm.
Ask More

What is the center bore of a Honda Civic wheel?

All modern Hondas utilize a 64.1mm center bore regardless of bolt pattern.
Ask More

What size rims fit a 2000 Honda Civic?

Wheel Configuration Reference

What is the bolt pattern on a 2000 Honda S2000?

114.3mm
Honda S2000 2000 2001 2002 2003 2004 16" Factory OEM Front Wheel Rim This is a 16" Front OEM Wheel Rim. This wheel has 5 lug holes and a bolt pattern of 114.3mm.
Ask More