The 2019 Honda Pilot requires SAE 0W-20 synthetic motor oil.
Official oil specification
For the 3.5-liter V6 engine used in the Pilot, Honda recommends a fully synthetic or synthetic-blend 0W-20 that meets Honda’s engine oil specification and API certification. This viscosity is chosen to support reliable cold starts, fuel efficiency, and overall engine protection across typical driving conditions. Always use oil that carries the correct certification and a current Honda-approved specification.
Oil capacity and basic guidance:
- Viscosity: SAE 0W-20
- Oil type: Fully synthetic or synthetic-blend
- Certification: API SN or newer; meets Honda’s specification
- Capacity: Approximately 5.5 quarts with filter (range 5.2–5.7 quarts depending on drain and filter changes)
Always verify the exact requirements in the owner’s manual for your vehicle and regional variations, and consider using Honda Genuine oil or another reputable brand that meets the same specifications.
Maintenance intervals and tips
Oil-change intervals for the Pilot vary by driving conditions and oil type. With synthetic 0W-20, Honda typically recommends about every 7,500 miles (12 months) under normal driving. In severe conditions—such as heavy city driving, frequent short trips, extreme temperatures, or towing—the interval may be shortened to approximately 3,750–5,000 miles or 6 months. Rely on the vehicle’s maintenance minder and manual for precise guidance, and always use a new oil filter with each change.
Summary
In short: the 2019 Honda Pilot takes SAE 0W-20 synthetic motor oil (fully synthetic or synthetic-blend) that meets API certification and Honda’s specification, with an approximate capacity of 5.5 quarts per change. Follow the maintenance schedule in your owner’s manual, adjusting for driving conditions, and use a high-quality oil and a new filter at every oil change.