The 2017 Nissan Rogue uses 0W-20 engine oil, with a total capacity of about 4.8 quarts including the filter, and a preference for full synthetic oil.
For the Rogue’s 2.5-liter four-cylinder engine, Nissan specifies a 0W-20 viscosity that meets API SN or higher and ILSAC GF-5 or GF-6 standards. Using a high-quality 0W-20 synthetic oil supports fuel efficiency, cold-start protection, and overall engine longevity. Exact capacity and maintenance intervals can vary by market and drivetrain configuration, so consult the owner's manual or a Nissan dealer for your VIN-specific requirements.
Oil specifications and standards
Key oil characteristics for the 2017 Rogue include a 0W-20 viscosity and a synthetic oil type, with the oil meeting API SN (or higher) and ILSAC GF-5 or GF-6 specifications. Always verify the exact specification in your vehicle’s documentation to ensure compatibility with your engine and warranty terms.
Why the right oil matters
Using the recommended 0W-20 synthetic oil helps with fuel economy, cold-start performance, and engine protection. It also supports the emissions and idle stability systems Nissan relies on, especially in extreme temperatures or demanding driving conditions.
Capacity and maintenance guidelines
The oil capacity for the 2017 Rogue, including the filter, is about 4.8 quarts. Maintenance intervals vary by driving conditions and oil type, but a typical synthetic 0W-20 change is often recommended every 5,000 to 7,500 miles, or as dictated by Nissan’s maintenance schedule. Always follow the schedule printed in your owner's manual and use the specified oil and filter.
Where to confirm the details for your Rogue
Because specifications can differ by market, trim, and VIN, consult the 2017 Rogue owner’s manual, the under-hood sticker, or your local Nissan dealer for the exact oil grade, capacity, and service interval for your vehicle. A dealer can confirm VIN-specific requirements and any regional variations.
Summary
In short: The 2017 Nissan Rogue takes 0W-20 engine oil, preferably full synthetic, with a capacity of approximately 4.8 quarts including the filter. Use oil that meets API SN or higher and ILSAC GF-5 or GF-6 standards, and follow the official maintenance schedule or your dealership guidance for best results.