The 2005 Honda Accord uses a standard 5-lug bolt pattern with 114.3 mm diameter (5x114.3). It also features a 64.1 mm center bore, and lug nuts sized M12x1.5 with a 60-degree conical seat. This setup covers the sedan and coupe models from that year.
Bolt-pattern specifics for the 2005 Accord
The following specs are used by most 2005 Accord models, including sedans and coupes in that year range. Use this as a reference when selecting wheels or after-market rims.
- Bolt pattern: 5x114.3 mm (5 on a 114.3 mm circle)
- Center bore: 64.1 mm
- Lug nut size and seat: M12x1.5 with a 60-degree conical (tapered) seat
- Number of studs: 5
Note: If you are installing aftermarket wheels, ensure the hub bore matches or you use centering rings; the offset and width must be compatible with your vehicle's suspension and fenders.
Additional considerations for wheel compatibility
While the bolt pattern and center bore determine basic compatibility, other factors such as wheel offset (ET), width, and overall diameter influence fitment, brake clearance, and suspension clearance. For a 2005 Accord, OEM wheels typically have a positive offset in the mid-40s range (millimeters) and widths around 6-7 inches for stock wheels; aftermarket wheels can vary widely. Always verify specifications with the wheel manufacturer and consider professional installation if you're unsure.
Also, this bolt pattern applies to both the sedan and coupe bodies of that year; trims like LX, EX, and V6 share the same lug configuration.
Summary
The 2005 Honda Accord uses a 5x114.3 bolt pattern with a 64.1 mm center bore. Lug nuts are M12x1.5 with a 60-degree conical seat, and the pattern applies to both sedan and coupe models. When shopping for wheels, verify these specs and account for offset, width, and centering to ensure proper fitment and safety.