The 2017 Ford F-150 generally uses SAE 5W-20 motor oil, in a full synthetic or synthetic-blend formulation. This is the standard specification for most engines in that model year, but always verify the exact grade in the owner's manual for your specific engine and operating conditions.
Oil Type and Specifications for the 2017 F-150
Before selecting oil, consider the key characteristics that determine the right product for your truck.
- Viscosity: SAE 5W-20 is the recommended grade for most 2017 F-150 engines.
- Oil type: A full synthetic or synthetic-blend oil is advised; conventional oil is generally not preferred for modern Ford engines.
- Standards: The oil should meet API SN Plus (or newer) and ILSAC GF-5 (or newer) specifications.
- Climate and service: Extremely hot environments or frequent heavy towing may prompt different guidance in the owner’s manual; always check your engine’s exact requirements there.
Bottom line: For standard driving, use SAE 5W-20 oil that meets API SN Plus and ILSAC GF-5 (or newer). If your duties or climate are unusual, consult the manual or a Ford service professional to confirm the precise specification for your vehicle.
Notes on Application and Maintenance
Oil capacity and change intervals vary by engine configuration and usage. Refer to the owner's manual for the exact capacity and recommended drain-and-fill intervals, and consider using Ford-approved synthetic oils or equivalent brands that meet the above specifications.
Summary
In short, the 2017 Ford F-150 expects SAE 5W-20 motor oil (full synthetic or synthetic-blend) that meets API SN Plus or newer and ILSAC GF-5 or newer. Always verify the specific requirement for your engine and conditions in the owner’s manual.