Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What type of oil does a 2014 Nissan Titan take?

The 2014 Nissan Titan requires SAE 5W-30 engine oil, with about 7 quarts (approximately 6.6 liters) needed for a full oil change including the filter. Full-synthetic oil is preferred for this model.


This article explains the official oil specification for the 2014 Titan, how much oil it holds, and practical maintenance guidance to keep the pickup running smoothly. The information applies to the VK56DE 5.6-liter V8 used in the 2014 Titan.


Oil specification and capacity


Key details you need at a glance are listed below.



  • Oil type and viscosity: SAE 5W-30 engine oil. Nissan commonly recommends a full-synthetic grade for this engine, though a synthetic blend may be acceptable if full synthetic is unavailable.

  • Oil capacity: About 7 quarts (roughly 6.6 liters) of oil with a new filter during an oil change.

  • Change interval: Typical intervals range from 5,000 to 7,500 miles under normal driving when using synthetic oil; shorter intervals (3,000–5,000 miles) are common with conventional oil or in severe driving conditions. Always follow the vehicle’s oil-life monitor and the owner’s manual.

  • Maintenance note: After an oil change, reset the oil-life indicator if equipped and use the OEM oil filter to ensure proper filtration and pressure.


In summary, the Titan’s engine calls for 5W-30 full-synthetic oil, with an approximate capacity of 7 quarts including the filter, and maintenance intervals guided by driving conditions and the oil-life monitor.


Viscosity and grade considerations


Viscosity is chosen to balance cold-start protection with high-temperature stability. For the 2014 Titan, 5W-30 is selected to perform well across a range of climates, providing reliable lubrication during cold starts and steady protection in hot conditions. Always confirm the exact specification in your owner’s manual or by consulting a Nissan dealer if you’re unsure about regional variations.


Practical maintenance tips


Keeping the right oil type and change schedule can extend engine life and maintain performance. Here are practical steps to follow when servicing a 2014 Titan.


Summary


The 2014 Nissan Titan uses SAE 5W-30 engine oil, with an approximate capacity of 7 quarts including the filter, and full-synthetic oil is strongly preferred. Adhere to the recommended change intervals based on oil type and driving conditions, and always consult the owner’s manual or a Nissan service professional for model-specific guidance.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.