A thermostat replacement for a 2008 Chrysler Sebring typically costs between about $10 and $100 for the part, with labor bringing the total to around $90 to $300 depending on engine variant and local rates.
In this guide, we explain how engine options affect compatibility, where to shop, and what to expect for labor costs so you can budget for a thermostat replacement on a 2008 Sebring.
Engine options and thermostat compatibility
Understanding which engine your 2008 Sebring has is essential because thermostat part numbers and housings can differ between the 2.4L four-cylinder World engine and the 2.7L V6. The thermostat’s temperature rating (commonly about 180–195 F) and whether a housing is included will influence both price and fit. The lists below summarize typical prices and buying considerations for the two engines.
Two engines used in the 2008 Sebring
Most 2008 Sebrings use either the 2.4L World engine or the 2.7L V6. Always verify the exact engine code when ordering a part by checking the VIN or the engine stamping, since thermostats are not always interchangeable between engines.
Prices and compatibility notes follow, with typical ranges drawn from common retailers and dealer listings.
- Aftermarket thermostat (basic unit, no housing): typically $10–$25
- Aftermarket thermostat with gasket or housing: $25–$60
- OEM/dealer thermostat: $40–$100
These ranges cover the vast majority of thermostat purchases for a 2008 Sebring. Always verify the exact part number for your engine before buying.
Where to buy and price ranges
Where you shop matters: the price of a thermostat can vary significantly between traditional auto parts stores, online retailers, and the dealer. The following ranges reflect common sources today.
- Auto parts chains and big-box retailers (in-store or online): typically $12–$40 for aftermarket parts
- Online retailers and aftermarket vendors (e.g., RockAuto, Amazon): often $10–$35 for basic thermostats
- OEM/dealer price: usually $50–$100+ depending on engine and part number
When shopping, compare part numbers and verify compatibility with your engine (2.4L vs 2.7L) and your VIN. Return policies and warranties can vary by retailer.
Labor costs and replacement considerations
Labor costs vary by shop and region, but thermostat replacement is typically a straightforward job that can take 1–2 hours for many cars. On average, labor might run around $80–$150 per hour, with total labor charges commonly in the $80–$250 range depending on accessibility and any related work (like replacing a nearby gasket or dealing with a stuck bolt).
Summary
For a 2008 Chrysler Sebring, thermostat parts generally cost between $10 and $100, with OEM parts at the higher end. Labor adds roughly $80–$250, depending on engine type (2.4L or 2.7L) and local labor rates. Always confirm your engine code and the exact part number before purchasing, and consider a complete thermostat kit if you want a new gasket and related seals included. Budget for a quick check by a professional if you’re not comfortable performing the replacement yourself.