The 2010 Nissan Rogue uses SAE 5W-30 motor oil that meets API SN or newer standards, with an oil capacity of roughly 4.3 quarts when changing the filter.
In more detail, the Rogue’s 2.5-liter four-cylinder engine (QR25DE) relies on a dependable, mid-grade oil to balance protection and fuel efficiency across typical driving conditions. Nissan’s guidance emphasizes using the correct viscosity and certification, and you should always verify specifications on the vehicle’s under-hood sticker or in the owner’s manual for your market, as regional recommendations can vary slightly.
Oil type and specifications
The following specifications apply to the 2010 Rogue’s engine oil needs.
- Viscosity: SAE 5W-30
- Certification: API SN or newer; ILSAC GF-5 or GF-4
- Oil capacity (with filter): approximately 4.3 quarts
In summary, for most conditions, use 5W-30 motor oil that meets API SN or newer standards. Use about 4.3 quarts when performing an oil change with a filter.
Oil type options and maintenance tips
Choosing between conventional, synthetic blend, and full synthetic
Oil can be conventional, synthetic blend, or full synthetic as long as it meets the specified viscosity and certifications. Many Nissan owners opt for synthetic or synthetic blend 5W-30 for improved protection and longer drain intervals, particularly in extreme temperatures or heavy driving. Regardless of oil type, follow the manufacturer’s service intervals and check the engine oil level regularly.
Summary
For a 2010 Nissan Rogue, the required oil is SAE 5W-30 that meets API SN or newer standards, with an approximate capacity of 4.3 quarts including the filter. Choose the oil type (conventional, synthetic blend, or full synthetic) that fits your climate and driving habits, ensuring it adheres to the specified viscosity and certification guidelines. Always consult the owner’s manual or under-hood label for your exact market’s recommendations.