The 2010 Honda Ridgeline requires 5W-20 engine oil and about 5.5 quarts of oil with the filter. For best performance, use a high-quality synthetic blend or full synthetic that meets Honda/ILSAC specifications. Always confirm with the owner's manual or the oil cap.
Oil specifications for the 2010 Ridgeline
The Ridgeline uses a 3.5-liter V6 engine that benefits from a light-viscosity oil. Honda standardizes on 5W-20 for most conditions, with 0W-20 as a potential option only if the manual permits it for extreme cold. Oil should meet API SN or newer and ILSAC GF-5 or GF-6 standards. The engine oil capacity, including the filter, is approximately 5.5 quarts (about 5.2 liters).
Recommended oil viscosities and oil types
The following options are commonly accepted for the 2010 Ridgeline:
- 5W-20 oil – synthetic blend or full synthetic that meets API SN/SN+ and ILSAC GF-5 or GF-6 specifications; use Honda Genuine Oil or an equivalent brand.
- 0W-20 oil – acceptable only if your manual specifies it for cold-weather operation; ensure it meets the same API/ILSAC standards.
In practice, most drivers stick with 5W-20 synthetic blend or full synthetic that meets API SN and ILSAC GF-5/6, and use about 5.5 quarts. Always verify the exact specification in the owner’s manual, on the oil cap, or with a certified technician.
Summary
For a 2010 Honda Ridgeline, the standard engine oil is 5W-20 with a capacity of roughly 5.5 quarts (including the filter). Use a synthetic blend or full synthetic that meets API SN and ILSAC GF-5/6, and consult the owner’s manual for any climate-based exceptions or specifics. Regularly check oil levels and adhere to the recommended maintenance schedule for oil changes.