The Chrysler 200 uses a standard 12-volt automotive battery (lead-acid). The exact group size and cold-cranking amps depend on the engine and model year, so you should verify with your owner's manual or the battery label.
Battery type and general specifications
Across the model years 2011–2017, the Chrysler 200 typically relies on a sealed, maintenance-free 12-volt lead-acid battery. This setup powers the car’s starting system and electrical accessories, and it is designed to be replaced at regular service intervals. Exact group size (the physical battery footprint) and the CCA rating vary by engine and trim, so the precise specification must be confirmed for your vehicle.
Model-year and engine variations
Chrysler offered several engines in the 200 range, including four- and six-cylinder options. While the fundamental 12-volt system remains, battery size and rating can differ slightly to accommodate electrical load and climate considerations for each powertrain and year. Always refer to the labeling on the replacement battery or the official manual for your exact configuration.
How to identify the exact battery size for your car
To ensure you purchase the correct replacement, start with the battery itself, the owner's manual, or a dealership. The precise group size, CCA, and reserve capacity (RC) are specified for your engine and year and are often printed on a label on the battery top or side. Your VIN can help a parts counter pull the exact fit.
To determine the exact group size and ratings for your Chrysler 200, consider these steps:
- Inspect the battery labeling for the group size, cold-cranking amps (CCA), reserve capacity (RC), and date code.
- Consult the owner's manual or factory service manual for the recommended battery specification for your engine and year.
- Cross-check the OEM part number (Mopar or the equivalent) against trusted parts catalogs or with a dealer using your VIN.
- Ask a qualified automotive technician or parts specialist to confirm compatibility if you are replacing a failed battery outside standard options.
Following these steps helps ensure you match the original electrical specifications and avoid starting or electrical issues.
Summary
The Chrysler 200 uses a 12-volt lead-acid battery that is typically maintenance-free. The exact group size and CCA vary by engine and model year, so verify via the manual, battery label, or dealer with your VIN to ensure a proper replacement.