The front wipers on a 2020 Kia Sorento are typically 26 inches on the driver’s side and 18 inches on the passenger side, with a 12-inch rear blade. This combination covers most US-market Sorentos, but sizes can vary by region or trim, so it’s wise to double-check in your owner’s manual or by measuring your current blades.
Front wiper sizes for the 2020 Sorento
Front blades clear the windshield across the main driving area and are commonly different lengths for the driver and passenger sides. For the Sorento, the standard front-fit lengths used in many markets are 26 inches (driver) and 18 inches (passenger).
- Driver-side blade: 26 inches
- Passenger-side blade: 18 inches
When replacing, if you’re unsure about exact lengths, check the blade packaging for the Sorento compatibility or verify by measuring the current blades. Using the correct lengths ensures full coverage and avoids streaks at the edges.
Rear wiper size
The Sorento’s rear wiper blade is typically smaller than the front blades. In most markets, the rear blade is 12 inches, though regional variations can occur. Always confirm with the owner’s manual or by inspecting the existing rear blade.
- Rear blade: 12 inches
When purchasing a replacement, make sure the mounting style matches the Sorento’s rear wiper arm—some models use a hook-end, others a pin-fitting attachment.
How to replace wipers on a 2020 Sorento
If you’re replacing blades yourself, here are practical steps to ensure a proper fit and safe operation.
- Confirm the correct lengths for each position: driver 26", passenger 18", rear 12".
- Lift the wiper arm away from the windshield until it stays in a raised position.
- Release the old blade by pressing the release tab or lever and slide it out of its retention mechanism.
- Attach the new blade to the wiper arm, ensuring it clicks or locks into place according to the design.
- Lower the wiper arm back onto the windshield gently to avoid damage.
- Test the wipers with the windshield dry and then with water to confirm a clean, streak-free sweep.
If you replace all front blades at once, you may opt for a matching blade type (beam or hybrid) for consistent performance in varying weather conditions.
Blade configurations explained
Wiper blades come in several styles, including conventional, beam (all-in-one), and hybrid designs. Beam blades tend to offer better contact and even pressure across the curve of the windshield, which can be beneficial for the Sorento’s windshield shape. Check compatibility with your vehicle year and market, and consider climate, warranty, and ease of installation when choosing a blade type.
Summary: For a 2020 Kia Sorento, plan for front blades of 26 inches (driver) and 18 inches (passenger) with a 12-inch rear blade. Verify exact sizes using your manual or by inspecting the current blades, and follow proper replacement steps to ensure optimal visibility and safety on the road.