The 2019 Honda Civic uses a cartridge-style oil filter housed in its dedicated filter housing, not a traditional spin-on canister. Use a Honda OEM cartridge filter or a compatible aftermarket cartridge filter designed for Honda engines, and pair it with the recommended oil (typically 0W-20) according to your owner's manual.
Understanding the cartridge filter design
The Civic’s oil system relies on a cartridge-style filter that sits inside a mounting housing under the engine cover. Replacement involves removing the housing cap, exchanging the old cartridge for a new one, and resealing the housing. This setup avoids the classic spin-on filter canister.
Engine variants and filter compatibility
While most 2019 Civics use the cartridge filter design, engine options can vary by trim and market. The common configurations are the 1.5-liter turbocharged engine and, in certain markets, the 2.0-liter engine. Regardless of the engine, the Civic uses a cartridge-type filter, so select a cartridge filter that matches Honda’s specifications for your engine code and VIN.
To ensure the correct part, verify the exact engine code (for example, the 1.5L turbo often uses a specific cartridge from Honda) and confirm compatibility with your vehicle through Honda’s parts catalog or a reputable retailer using your VIN. OEM Honda filters are designed for optimal fit and filtration.
Note: Always consult the owner's manual or a Honda dealer for the precise filter part number relevant to your vehicle, as numbers can vary by production batch and market.
List of typical filter options
The following options are commonly compatible with the 2019 Civic’s cartridge-style oil filter. The list includes both genuine Honda options and widely used aftermarket cartridge filters. Verify fitment before purchasing by engine code or VIN.
- Honda Genuine Oil Filter Cartridge for Honda 1.5L/2.0L engines (cartridge-style, OEM option)
- Aftermarket cartridge oil filters from brands such as Bosch, Mann-Filter, WIX, or Fram that specify compatibility with Honda engines and cartridge design
- Filter housing cap gasket or O-ring kit if replacing the seal during filter change
Using the correct cartridge filter helps maintain filtration efficiency and engine protection. If you’re unsure about fitment, consult a local dealer or parts retailer with your VIN for an precise match.
Oil grade and capacity considerations
Honda generally recommends 0W-20 full synthetic oil for the 2019 Civic across most markets. This grade supports cold-start performance and fuel efficiency. The total oil capacity, including the filter, varies by engine type and model, and typically falls in the range of about 3.5–4.0 quarts. For an exact figure for your vehicle, check the owner's manual or service data for your VIN.
When performing maintenance, ensure you replace the filter correctly, replace the filter cap O-ring if applicable, and reset the service reminder after completing the change. Adhering to these steps helps maintain optimal engine protection.
Summary
The 2019 Honda Civic uses a cartridge-style oil filter (not a spin-on) designed for Honda engines. Choose either Honda Genuine or a qualified aftermarket cartridge filter that matches your engine code, and use 0W-20 oil as recommended. Always verify exact part numbers and capacities for your specific VIN with a dealer or trusted parts supplier to ensure proper fitment.