Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size is the fog light bulb on a 2008 Honda CRV?

The fog light bulb size is H11.


The 2008 Honda CR-V commonly uses an H11 bulb for its fog lights (a 12-volt, about 55-watt option). While this is the typical size, variations can exist by trim level, market, or aftermarket replacements. This article explains the standard size, how to verify your specific vehicle, and how to replace the bulb if needed.


Common bulb size for the 2008 CR-V fog lights


For most 2008 CR-Vs, the fog lamps are equipped with H11 bulbs. This is the standard configuration for that generation, providing a good balance of brightness and compatibility with the fog light housings commonly used by Honda at the time.


However, there can be regional or trim-related differences, so it’s wise to confirm before purchasing replacements. The quickest checks are the owner’s manual, the original parts diagram, or inspecting the bulb itself.


Here’s the most common bulb type you’ll likely need when replacing the fog lights on a 2008 CR-V.



  • H11 — standard 12V, approximately 55W fog light bulb used by the majority of 2007–2011 CR-V models.


In practice, H11 is the size you’ll most often encounter, but always verify for your exact vehicle to avoid buying the wrong bulb.


How to verify the bulb size for your vehicle


To be sure you buy the correct bulb, check these steps before purchasing a replacement.



  • Consult the owner's manual or a dealer Parts Diagram for your exact year and trim to confirm the bulb size.

  • Remove the fog light bulb carefully and inspect the base for markings or labels that indicate the size.

  • Check the bulb’s base shape and connector to compare with standard H11 bases.

  • If uncertain, bring the existing bulb to an auto parts store or contact a Honda dealer with your VIN for precise specification.


Verifying the size helps ensure you purchase the correct H11 bulb or identify any alternative if your configuration differs.


Replacing the fog light bulb


Follow these steps to replace a fog light bulb on a 2008 CR-V safely and effectively.



  1. Park on a level surface, turn off the engine, and set the parking brake. If possible, disconnect the battery for extra safety.

  2. Gain access to the fog light housing from behind the bumper. Depending on trim, you may need to remove a splash shield or inner fender liner.

  3. Disconnect the electrical connector from the bulb by squeezing the tab and pulling the plug free.

  4. Remove the old bulb by turning it counterclockwise or releasing the retaining clip, depending on the housing design.

  5. Handle the new bulb with gloves or a clean tissue to avoid skin oils contacting the glass; insert the bulb into the socket and twist or secure the retaining mechanism as required.

  6. Reconnect the electrical connector, reassemble any shields, and test the fog lights before finishing the job.

  7. If the light does not come on, recheck connections and ensure the fuse for the fog lights is intact.


Replacement best practice is to use a like-for-like H11 bulb (12V, ~55W) unless your verification indicates a different specification for your vehicle.


Tools and safety considerations


Before you begin, gather these common tools and observe safety precautions to avoid damage or injury.



  • Gloves or clean cloth to handle the bulb (to prevent oils from your skin getting on the glass).

  • Basic hand tools as needed to remove splash shields or access panels (screwdriver, pliers).

  • A flashlight to illuminate the work area and a safe surface to place removed parts.


Following these precautions helps ensure a smooth replacement and reduces the risk of damaging the fog light housing.


Summary


The fog light bulb on a 2008 Honda CR-V is typically an H11 bulb (12V, about 55W). While this is the common configuration, always verify with the owner's manual, OEM diagrams, or by inspecting the bulb itself, since regional or trim variations can occur. Replacement is straightforward: access the housing, swap in a new H11 bulb, and test the lights. When in doubt, consult a dealer or parts professional to confirm the exact specification for your vehicle.

What size bulb is the fog light on a Honda CRV?


Honda CR-V Bulb, Foglight (H11) (12V 55W) (Valeo)



What kind of bulb does a 2007 Honda CRV fog light take?


Bulb Type: H11 12V 55W Halogen Bulbs.



Which CR-V is the fastest?


When it comes to speed and acceleration, the Honda CR-V stands out as the fastest SUV in Honda's lineup, particularly the Hybrid Sport Touring model. This version achieves a remarkable 0 to 60 mph time of approximately 7.7 seconds, which is impressive among compact SUVs.



Can I use H11 for fog lights?


H11 LED BULBS | HEADLIGHT AND FOG LIGHT BULB REPLACEMENTS
Upgrading your vehicle to H11 LED Bulbs significantly increases the light output of your headlights or fog lights.


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.