The Toyota Tundra equipped with the 5.7-liter V8 typically uses synthetic 5W-30 engine oil, with a capacity of about 7.9 quarts (7.5 liters) including the filter. Always verify the exact specification for your year and region in the owner's manual or with a Toyota dealer.
Oil type and viscosity
These guidelines cover the standard recommendation from Toyota and common maintenance practices for the 5.7 L V8. Using the correct viscosity and oil type helps protect the engine under normal and demanding driving conditions.
- Synthetic 5W-30 engine oil (full synthetic is preferred). API service level should be SN (or newer) and compatible with ILSAC GF-5 or newer.
- If your owner’s manual specifies a different grade for certain climates or markets, follow that specification. In most cases for the 5.7 L V8, 5W-30 is the standard recommendation.
Using the recommended viscosity and oil type supports proper lubrication, fuel efficiency, and long-term engine health.
Oil capacity and service notes
Understanding the correct quantity and service guidance helps ensure you replace the oil without underfilling or overfilling the engine.
- Oil capacity with filter is approximately 7.9 quarts (7.5 liters). Some sources list a range around 7.5–8.0 quarts depending on exact configuration and filter choice.
- Always top off with the same oil to reach the full mark on the dipstick after an oil change. Do not mix oils of different viscosities or types unless the manual allows it.
Following the proper capacity and topping procedure helps maintain proper oil pressure and engine cleanliness, especially after a filter change.
How to confirm the exact specification for your vehicle
Because older and newer model years can have small variances, it’s important to double-check your specific truck’s requirements.
- Consult the owner’s manual for the exact oil viscosity, API specification, and capacity for your year/model.
- Check the under-hood label near the engine for the recommended oil grade and capacity.
- If in doubt, contact a Toyota dealership or use the VIN-based service portal to confirm the correct oil specification.
Verifying these details ensures you use the correct oil for your specific Tundra configuration and regional climate.
Summary
For most Toyota Tundra trucks with the 5.7 L V8, the standard oil is synthetic 5W-30, with an oil capacity of about 7.9 quarts including the filter. Use API SN or newer specifications and follow your owner's manual for any model-year nuances or climate-specific guidance. Regular checks and using the correct oil grade help maintain engine performance and longevity.
How many quarts of oil does a 5.7 V8 Toyota Tundra take?
8.5 quarts
8.5 quarts (with filter). After refill check oil level. Torque: 30 ft/lbs (Oil Drain Plug) Replace both the oil pan drain plug, and gasket.
Can you use 5W-30 in a Toyota Tundra?
What Is the Recommended Toyota Tundra Oil Type? The manufacturer recommends full synthetic 5W-30 oil. If you're worried about frigid winter temperatures like we get every winter in MA, consider 0W-30 full synthetic oil.
Can I use 5W30 instead of 0W20 in my Toyota?
Modern engines designed for 0W-20 oil require specific viscosity for optimal performance, and using thicker 5W-30 oil may compromise efficiency while potentially voiding manufacturer warranties.
What year was the worst year for Toyota Tundra?
The 2000 Tundra is considered the worst model year ever; the NHTSA received over 1,000 pieces of negative feedback about the 2000 Tundra. Luckily, most reports were for issues that had nothing to do with safety. The most widely reported issues were poor paint quality and body panels rusting.