The 2012 Nissan Juke generally requires 5W-30 full-synthetic motor oil that meets API SN or ILSAC GF-5. Some engines or climates may allow alternative viscosities, but you should verify with the owner's manual or the oil cap on your engine.
Engine options in the 2012 Juke
In different markets, the Juke was offered with a few powertrains. The gasoline lineup centers on a 1.6-liter family with and without turbocharging, while some regions also hosted a diesel option. Oil requirements tend to align with the engine family, though 5W-30 remains the common baseline.
- 1.6L gasoline engine (HR16DE) — normally aspirated
- 1.6L turbocharged gasoline engine (DIG-T) — turbocharged option
- 1.5L diesel (dCi) — in markets where offered
Across these engines, the guidance is to use a high-quality synthetic or synthetic-blend oil with the recommended viscosity, avoiding very thick oils. Always confirm for your specific vehicle.
Recommended oil by engine type
The following viscosities reflect Nissan’s typical guidance for the 2012 Juke family. Regional variations exist, so treat this as a guide and verify in your manual.
- Gasoline 1.6L HR16DE — 5W-30 synthetic oil (API SN / ILSAC GF-5 or better)
- Gasoline 1.6L DIG-T turbo — 5W-30 synthetic oil (API SN / ILSAC GF-5 or better)
- Diesel 1.5L dCi — typically 5W-40 synthetic oil (or as specified by your manual; some markets allow 5W-30)
Always use oil that meets the required standards and follow climate-specific guidance from the manual. If unsure, consult a Nissan dealer or a qualified mechanic.
How to confirm the exact specification for your car
To ensure you’re using the correct oil for your vehicle, follow these steps.
- Check the owner's manual and the oil filler cap for the recommended viscosity and spec.
- Look for the under-hood sticker or service badge that states the oil grade and standard.
- Know your engine code (HR16DE, DIG-T, or dCi) since recommendations can differ by powertrain.
- Ask your Nissan dealer or a qualified mechanic to confirm the precise specification for your VIN.
Following these steps will help you choose the right oil for reliability and warranty purposes.
Summary
The 2012 Nissan Juke typically uses 5W-30 synthetic motor oil that meets API SN/ILSAC GF-5, with diesel variants often calling for 5W-40 and some markets allowing 5W-30. Always verify the exact specification in the owner's manual or on the oil cap for your specific vehicle and region.