In a word: a cartridge-style oil filter housed in a canister is used. The precise part number depends on whether your Civic has the 2.0-liter naturally aspirated engine or the 1.5-liter turbo, as well as the trim level.
More detail: Honda’s 2023 Civic lineup is available with two engines. Both use a replaceable cartridge filter rather than the older spin-on filter. When you service the car, you replace the filter cartridge inside the cap and replace the engine oil. For the correct filter and oil specification, consult your owner’s manual, the Honda official parts catalog, or a dealer with your VIN.
Engine options and filter design
Identify your engine to understand which cartridge filter your Civic uses and to ensure you order the correct part. Here’s a quick overview of how the two engines use the filter system.
- 2.0L naturally aspirated engine: Uses a cartridge-type oil filter in a housing that you service by replacing the cartridge element inside.
- 1.5L turbocharged engine: Also uses a cartridge-style filter inside a housing; service involves replacing the cartridge element rather than a spin-on unit.
Regardless of the engine, always replace with a cartridge-type filter designed for Honda engines and use the appropriate synthetic oil as recommended by Honda for your climate and driving conditions.
How to identify and purchase the correct filter
To ensure you get the correct filter, confirm your engine code and refer to official sources or a dealer. Use the following steps to determine the exact part number for your Civic.
- Check the engine code and trim level in the owner’s manual or on the engine shield label; this identifies the correct filter family.
- Look up the part number in Honda’s official parts catalog or ask a dealer with your VIN for the exact oil filter cartridge designed for your engine.
- If buying aftermarket, select a cartridge-style oil filter rated for Honda engines and compatible with the synthetic oil your Civic uses (often 0W-20 or 5W-30, depending on climate and model).
- Also obtain a new drain plug washer and the filter housing O-ring if your service guide requires replacement seals during removal.
Concluding: Spin-on filters are not used on 2023 Civics. Use the cartridge-style filter specified for your engine code and follow the owner’s manual for the correct oil viscosity and change interval.
Maintenance notes
Follow Honda’s recommended oil-change interval for your driving conditions. For many Civic models, synthetic oil at 0W-20 or 5W-30 is typical, and changes are recommended every 5,000 to 7,500 miles under normal conditions, with more frequent changes under severe driving. Always torque the filter housing correctly and dispose of used oil and filter responsibly.
Summary
The 2023 Honda Civic uses a cartridge-type oil filter inside a housing for both the 2.0L and 1.5L engines. Determine your engine type and check the official Honda parts catalog or your dealer for the exact filter part number and oil specification; replace the cartridge element during every oil change and use the recommended synthetic oil.
What oil filter does a Honda Civic use?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.
What size is the Honda oil filter?
Measurements
| Item Dimensions | 10 x 6 x 1 inches |
|---|---|
| Thread Size | M14x1.5 |
| Item Weight | 0.2 Pounds |
What oil is needed for a 2023 Honda Civic?
synthetic 0W-20
Most modern Honda Civics require full synthetic 0W-20—synthetic blend typically isn't an acceptable substitute for vehicles specifying full synthetic.
What oil filter for 2023 Honda Civic?
Oil Filter - Honda (15400-PLM-A02)