What size headlight bulb for 2010 Honda Accord?

The low beams are typically H11 and the high beams are 9005 (HB3) for most 2010 Accord models with halogen headlights.

In practice, the exact bulb size can vary by trim, market, or whether the car has optional HID headlights. This article outlines the common sizes and how to verify the correct bulb for your specific vehicle.

Common bulb sizes for standard halogen headlights

These sizes apply to the factory halogen headlights commonly found on the 2010 Accord. Always confirm with the bulb you remove or the owner's manual if you are unsure.

• Low beam: H11


• High beam: 9005 (HB3)

When replacing, consider replacing bulbs in pairs on the same axle to maintain even lighting and avoid color or brightness disparities. Handle bulbs with gloves or a clean cloth to avoid skin oils on the glass.

Other headlight configurations

Some 2010 Accords were equipped with optional HID headlights or arrived in markets with different headlight assemblies. HID systems use bulbs that are not interchangeable with standard halogen bulbs and require a ballast and specific installation. If your car has HID headlights or a non-U.S. specification, consult the owner’s manual or a dealer to confirm the exact bulb type.

How to verify the correct bulb size for your car

Follow these reliable steps to confirm the correct bulb size before purchasing replacements.

• Check the owner's manual or the label on the headlight assembly itself for the recommended bulb type.


• Inspect the removed bulb for stamped part numbers (such as H11 or 9005) to confirm the size.


• Ask a reputable parts retailer with your vehicle details or VIN to ensure compatibility.

Once you have the correct bulb type, replace bulbs according to the vehicle's guidelines and ensure the headlights are properly aligned after installation.

Summary

For most 2010 Honda Accord models with halogen headlights, use H11 for low beams and 9005 for high beams. If your car has HID headlights or a non-U.S. variant, the bulb types differ and you should refer to the owner’s manual or a dealer to confirm the exact specifications. Always verify with the existing bulb or documentation before purchasing replacements.

Do I need H11 or 9005?

H11 bulbs are designed for use as low beam headlights, while 9005 bulbs are typically used for high beams. This results in a higher brightness level for the 9005 bulbs compared to the H11 bulbs.

What headlight bulb does a 2010 Honda Accord take?

Replacement Light Bulbs

What's the best oil to put in a Honda Accord?

Information

What kind of bulbs do Honda Accords use?

Honda Accord (2016) Bulb Size Chart