The front driver-side blade is typically 24 inches, the front passenger-side blade is 18 inches, and the rear blade is 12 inches for the 2019 Sorento. This combination covers the vehicle’s primary visibility surfaces.
Front wiper sizes
The front blades on a 2019 Sorento come in two lengths to fit the driver and passenger sides.
- Driver-side front blade: 24 inches
- Passenger-side front blade: 18 inches
The listed lengths reflect the factory-recommended sizes used on most Sorento models. Always verify by checking the owner’s manual or the blade packaging if you’re unsure.
Blade length specifics
These measurements are the standard for the 2019 Kia Sorento, but variations can occur by trim or aftermarket replacements. When in doubt, confirm with your parts dealer or the Kia official parts catalog.
Rear wiper size
The Sorento uses a single rear blade, which is commonly 12 inches in length.
- Rear blade: 12 inches
As with the front blades, verify the exact rear blade length by checking your current blade or the vehicle’s documentation, since some regional markets or newer accessories may differ slightly.
Rear blade compatibility
Rear blade sizes are typically straightforward, but always confirm the correct part number if you’re buying online to avoid mismatches with mounting type or curvature.
How to confirm the correct size
If you’re replacing blades yourself, a quick check will prevent buying the wrong size.
- Look at the current blades on the Sorento and measure their length from end to end.
- Consult the owner’s manual or Kia’s official parts catalog for the exact specifications for your model year.
- When ordering, specify “2019 Kia Sorento front 24\" driver, 18\" passenger; rear 12\".”
- Consider blade style (multiposition vs. hybrid) and mounting type (hook, pin, or J-hook) to ensure compatibility.
- If you’re unsure, bring the current blade or vehicle VIN to a parts retailer for an in-person match.
Accurate sizing helps ensure optimal visibility across different weather conditions and reduces streaking or skipping caused by ill-fitting blades.
Summary
For a 2019 Kia Sorento, the standard replacement sizes are front driver-side 24 inches, front passenger-side 18 inches, and rear 12 inches. Always confirm with your vehicle’s documentation or the parts retailer to account for any regional or trim-specific variations, and consider the mounting style when purchasing replacements.